Hi all,
I'm trying to enable the SATA port 1 in an AMD bettong board. I've been able to
enable port 0
adding in BiosCallOuts.c the next code after find it in other mainboard.
AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr)
{
...
/* sata configuration */
FchParams_reset->FchReset.SataEnable = (CONFIG_HUDSON_SATA_MODE
== 0) || (CONFIG_HUDSON_SATA_MODE == 2);
...
}
Once the system boots I see the kernel detects both SATA but the port 1 remains
down although one disk is connected
[ 0.715359] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3
impl SATA mode
...
[ 0.716031] ata1: SATA max UDMA/133 abar m1024@0xf0b8d000 port 0xf0b8d100
irq 26
[ 0.716033] ata2: SATA max UDMA/133 abar m1024@0xf0b8d000 port 0xf0b8d180
irq 26
Anybody knows how to enable the SATA port 1?
Regards
Jorge
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
