Hi Mikal,
>> - If I don't have CONFIG_VPD and CONFIG_SMMSTORE enabled, the entries >> RW_VPD(PRESERVE) and SMMSTORE(PRESERVE) are needed? >No, not needed. You may remove them. My FMD was just an example. >> - The RW_UNUSED@0x0 0x20000 could be used? Maybe is it possible to relocate >> the AMDFW to 0x0 instead of 0x20000? >Not possible. PSP check for certain offsets in search of its own >firmware in SPI flash. All you cna do is to relocate it to CBFS to use >different base address. >> - CONSOLE 0x10000 is needed for something? >It is for SPI flash console logging. You also may remove it if not >selected or needed. >> - Is is possible to only have the payload in the RO area? >AFAIK it's not. If you put the fallback/payload name to RO_REGION_ONLY, >it will probably do not launch the payload at all if executing from RW >partition. Thank you again for this valuable info. I think I could get a booting system soon. I'll try without the 'lib/cbfs: Add fallback to RO region to cbfs_boot_locate' trying to move the AGESA to try to fill the empty space playing with 'CONFIG_AGESA_BINARY_PI_LOCATION' fallback/dsdt.aml 0x30ec0 raw 6656 none (empty) 0x32940 null 2042712 none <-------------- AGESA 0x2254c0 raw 690436 none (empty) 0x2cde40 null 1405592 none <------------- bootblock 0x425100 bootblock 944 none Regards,
_______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
