On 04.12.2019 16:15, Kyösti Mälkki wrote: > On Wed, Dec 4, 2019 at 4:48 PM Michal Zygowski > <[email protected]> wrote: >> On 03.12.2019 18:29, Kyösti Mälkki wrote: >>> Hi >>> >>> Regarding the deprecation of AGESA platforms due to ROMCC_BOOTBLOCK. >>> >>> As of 3rd December there is active development, while not much testing >>> yet, only for the following AGESA platform boards: >>> >>> * asrock/imb-a180 >>> * lenovo/g505s >>> * pcengines/apu1 >> I do not exactly understand "not much testing". While uploading patches >> for family14 or apu1 I always build, flash, boot Linux test whether it >> works... > You can read this no testing at all for fam15tn and fam16kb so far, > and testing fam14 with a single board. > > I believe there was a commit for apu1 where newly added bootblock.c > file was not linked in, while the boot sequence to OS worked just > perfect? Some super-io configuration bits are sticky and powered from > Vbat /Vrtc or Vstb rails, these bootblock changes should be verified > with (RTC) battery removed. True. The NCT5104D has UARTA LDN enabled by default with IO base 0x3f8. So Vbat wouldn't affect it at all. > > Kyösti > _______________________________________________ > coreboot mailing list -- [email protected] > To unsubscribe send an email to [email protected]
-- Michał Żygowski Firmware Engineer http://3mdeb.com | @3mdeb_com _______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
