I've also left the board for an hour or two, just in case this was slow ram training or something
-Matt On Sun, Dec 8, 2019 at 1:43 PM Matt B <matthewwbradl...@gmail.com> wrote: > Hi, > > In the spirit of board report coverage, I pulled out the (used, but new to > me) AM1I-A I have and spent a day or two trying to install the latest > coreboot on it. > > The board boots fine under the stock bios, and returns to working order if > flashed with my backup, but shows little signs of life with coreboot. > > Along the way I extracted and included the vgabios rom, as well as tried > with a nivida card, so I'm pretty sure that's not it. > > I tried having it save the console output to flash, but that made the > build fail. [1] > > Yesterday evening I noticed it was configured by default to use > open-source init (and for some reason the build finishes without error), > but as far as I know that doesn't exist for family 16h. Switching to > BinaryPI causes the build to fail. [2] 3rd party blobs are cloned and > enabled. > > I'm running an Athlon 5250, or something of that nature, with a couple of > gigs of ram on one dimm. My current .config is [3]. > > Sincerely, > -Matt > > [1] https://pastebin.com/FZEiCq8P > [2] https://pastebin.com/Q30u7Lgs > [3] https://pastebin.com/ufuq22i8 >
_______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
