Question specifically for Kyösti Mälkki or those similarly knowledgeable:
My current .config seems to say I'm still using romcc.
I assume I've pulled the latest ("git clone
https://review.coreboot.org/coreboot"; as of a couple days ago) so would
those changes you mentioned be present?
If so, is there an option to test the C bootblock in the menu somewhere?
Thanks,
-Matt
On Sun, Dec 8, 2019 at 5:19 PM Matt B <[email protected]> wrote:
> Ok. I'm kind of annoyed at myself now.
>
> Your thread revealed the answer. The stock bios will boot if the dimm is
> in either slot. Coreboot will only boot if it is in the outermost one.
> It never occurred to me to try this.
>
> The board now boots to the OS. More details to follow later this evening
> or tomorrow morning.
>
> Thanks,
> -Matt
>
> On Sun, Dec 8, 2019 at 3:45 PM Elisenda Cuadros <[email protected]> wrote:
>
>> Hi Matt,
>>
>> Did you see this old thread?
>>
>> https://www.mail-archive.com/[email protected]/msg51097.html
>>
>> I have and AM1I-A too and I had some problems at the beginning..
>>
>> Regards,
>>
>> Eli
>> On 08/12/2019 19:43, Matt B wrote:
>>
>> Hi,
>>
>> In the spirit of board report coverage, I pulled out the (used, but new
>> to me) AM1I-A I have and spent a day or two trying to install the latest
>> coreboot on it.
>>
>> The board boots fine under the stock bios, and returns to working order
>> if flashed with my backup, but shows little signs of life with coreboot.
>>
>> Along the way I extracted and included the vgabios rom, as well as tried
>> with a nivida card, so I'm pretty sure that's not it.
>>
>> I tried having it save the console output to flash, but that made the
>> build fail. [1]
>>
>> Yesterday evening I noticed it was configured by default to use
>> open-source init (and for some reason the build finishes without error),
>> but as far as I know that doesn't exist for family 16h. Switching to
>> BinaryPI causes the build to fail. [2] 3rd party blobs are cloned and
>> enabled.
>>
>> I'm running an Athlon 5250, or something of that nature, with a couple of
>> gigs of ram on one dimm. My current .config is [3].
>>
>> Sincerely,
>> -Matt
>>
>> [1] https://pastebin.com/FZEiCq8P
>> [2] https://pastebin.com/Q30u7Lgs
>> [3] https://pastebin.com/ufuq22i8
>>
>> _______________________________________________
>> coreboot mailing list -- [email protected]
>> To unsubscribe send an email to [email protected]
>>
>> _______________________________________________
>> coreboot mailing list -- [email protected]
>> To unsubscribe send an email to [email protected]
>>
>
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
