They are of TWO different thickness. Micrometer measurements of one new looking sample are:
.248
.347
So, it looks like the nominal dimensions are .250 and .350, Craig.
Diameters rune about .985 to fit loosely into a one inch bore probably.
They are not all that critical.
NOTE:
I have used riveted Chevy pickup truck disc brake pads to cut out my own
pucks for Goodyear brake HOMEBUILT aircraft projects.
Vastly superior performance over original organic pads.
Of course, not legal to do on an Ercoupe even if far better. <g>
Bob
craig hinton wrote:
>
> Help! I have Goodyear brakes on my 415-C Ser# 3248. What is the length
> of NEW brake pucks. Service manual says .460inch. But it looks like the
> stationary puck must be shorter. Service manual implies that both pucks
> are same length. Is this correct?
>
> ---------------------------------
> to unsubscribe send mailto:[EMAIL PROTECTED]
> _____________________________________________________________
> Want to find the best email lists? Check out the Topica 20!
> http://www.topica.com/topica20
---------------------------------
to unsubscribe send mailto:[EMAIL PROTECTED]
_____________________________________________________________
Want to find the best email lists? Check out the Topica 20!
http://www.topica.com/topica20
<<attachment: winmail.dat>>
