Remember the woodgrain side panels on station wagons? How about the large numbers on the top of police cars. Or maybe window tint?
One way to keep things that want to stick to each other from sticking until you are ready and have them all smoothed out, is to wet them. Oddly, this doesn't keep them from sticking as good as ever, just keeps them from sticking right away. Perhaps coating both the welt and the groove, then putting some water on them would allow the proper positioning before they start to stick. Sure works on other things. Dick -----Original Message----- From: [EMAIL PROTECTED] <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Wednesday, March 15, 2000 7:21 PM Subject: Re: [COUPERS-TECH] Cement??? >I replaced my window welts a couple years ago and I used standard contact >cement. I carefully painted the bottom of the window welt trough with >cement, and the welt itself only on the bottom. I didn't want the welt to >get stuck half way into the trough. So far the welt seem to be staying in >place very nicely. I didn't have any professional advice, so there is >probably a "proper" way to do this job. Wayne Hannah, N3544H, Shelton, WA > >--------------------------------- >to unsubscribe send mailto:[EMAIL PROTECTED] >_________________________________________________________ >Enlighten your in-box. http://www.topica.com/t/15 --------------------------------- to unsubscribe send mailto:[EMAIL PROTECTED] _________________________________________________________ Enlighten your in-box. http://www.topica.com/t/15
<<attachment: winmail.dat>>
