----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
The microfilm drawings from bowling green university contain drawings of the glove box assembly. The door assy itself is Dwg 415-51013. The instrument panel assy dwg shows how the spring, door, and cardboard glovebox all go together. The spring bolts to the back of the instrument panel with two screws. The door assy mounts to two welded L brackets on the back of the panel. Then the cardboard glove box mounts to the back of the panel. It is easiest if you can find one assembled and look at it. David Abrams [EMAIL PROTECTED] http://ercoupe.com > -----Original Message----- > From: Guillermo Rivacoba [mailto:[EMAIL PROTECTED] > Sent: Sunday, July 29, 2001 10:10 PM > To: [EMAIL PROTECTED] > Subject: [COUPERS-TECH] Mech questions > > > Other question. Does any one know how to assemble the "glove > compartment" > doors mechanism in the instrument panel? any diagrams some where? ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
