----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
They are on microfilm (not fiche). The film is on a reel. Many libraries have film readers. Bowling Green State University Roll 1 Engineering & Research Corporation (ERCO) drawings of the model 415-C, 1937-1945 Roll 2 Coupe Capers (Vol.1, no.1-v.8, no.12 - v.2 missing) Winter 1969-May 1980 Roll 3 Coupe Capers (Vol.9, no.1-v.17, no. 12) June 1980-Dec 1988 cost is about $30 roll order from http://www.bgsu.edu/colleges/library/cac/request.html David Abrams [EMAIL PROTECTED] http://ercoupe.com > -----Original Message----- > From: Hartmut [mailto:[EMAIL PROTECTED] > Sent: Monday, July 30, 2001 3:49 PM > To: David Abrams > Subject: Re: [COUPERS-TECH] Mech questions > > > david. Where would someone get these drawings from ??? > Green University ??? > > Hartmut , 415-E N3330H > > San Francisco > > > David Abrams wrote: > > > > ----[Please read http://ercoupers.com/disclaimer.htm before > following any advice in this forum.]---- > > > > The microfilm drawings from bowling green university > contain drawings > > of the glove box assembly. The door assy itself is Dwg 415-51013. > > The instrument panel assy dwg shows how the spring, door, and > > cardboard glovebox all go together. The spring bolts to the back of > > the instrument panel with two screws. The door assy mounts to two > > welded L brackets on the back of the panel. Then the > cardboard glove > > box mounts to the back of the panel. It is easiest if you can find > > one assembled and look at it. > > > > David Abrams > > [EMAIL PROTECTED] > > http://ercoupe.com > > > ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
