----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Rob, I used MEK with a red Scotch-Brite pad. Of course, in order to get the pad into the fuel tanks we had to completely open each tank. We had to anyway, as we found lots of corrosion in them. Syd Cohen Robert Hooker wrote: > ----[Please read http://ercoupers.com/disclaimer.htm before following > any advice in this forum.]---- > > I am tryng to clean the 'sloshing' compound out of my > wing tank It was starting to break down and would have > flecks in the strainer. It is a rubber like compound. > MEK softened it, but did not disolve it (can pressure > wash it off, but the bulkheads prevent acess) > Isopropyl alcohol did little or nothing. Any > suggestions on an approach to cleaning this crap out? > As if we are going to get to fly our little airplanes > again. > Rob Hooker > N 87315 > > ===== > The man who is a pessimist before forty-eight knows too much; if he is > an optimist after it, he knows too little. -Mark Twain, author > (1835-1910) > > __________________________________________________ > Terrorist Attacks on U.S. - How can you help? > Donate cash, emergency relief information > http://dailynews.yahoo.com/fc/US/Emergency_Information/ > ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
