----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I used Corrosion-X to seal the inside of all wing, fuselage and tail surfaces. Used it also on the wing attachment points. I think these kind of oils are the best corrosion prevention one could do. Primer is good, but the self healing oil film of corrosion-X or ACF-50 is unbeatable. These oils crawl in every little gap and seal where primer did not reach. I am using Corrosion -X and lately ACF-50 for 3 Years and could not find a negative effect . Just make sure not to use any graphit Oils, because dry graphit especially has a corrosive effect on Aluminum I learned lately. Corrosin-X and ACF-50 are both non corrosive . Hartmut San Francisco, N3330H [EMAIL PROTECTED] wrote: > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > Is anyone having success using corrosion x on their > ercoupe? > ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
