----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
the original wheels will block view of certain inst. if they have been changed. i had rams and changed after putting the larger panel in , changed to the originals and soon changed back because of view being blocked. coyt ----- Original Message ----- From: "Greg Bullough" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, May 02, 2002 12:54 PM Subject: RE: [COUPERS-TECH] control yokes - take two > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > One thing to watch for... the originals are flat and if > panel changes have been made since the ramshorns > were installed, the originals may not clear any new > panel protuberances (e.g. DG setting knob) that have > been added. > > Just something to watch for. > > Greg > > At 07:20 PM 5/2/02 +0000, Rick Green wrote: > >----[Please read http://ercoupers.com/disclaimer.htm before following any > >advice in this forum.]---- > > > >I'm hoping that going back to the original will allow me to GAIN the ten > >pounds. I have to do a tight bicep curl to get the full up travel with > >the ram's horns. > > > >Rick > > > >Greg Bullough wrote: > > > At 12:06 AM 5/2/02 +0000, Rick Green wrote: > > > >I'm thinking that due to the "extended" reach of the > > > >ram's horns, that these might be a different length of > > > >shaft. > > > > > > > >So my question is, does converting from one style to the > > > >other require different length shafts? > > > > > > No, you use the same shaft. (same degree of down-elevator). > > > > > > However, you may have to lose about ten pounds to get > > > full up elevator travel :-) > > > > > > Greg > > > > > > (P.S.: I'm not kidding here) > > > > > > > > > > > > ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
