The sissors are pivoted on a bushing that the bolt passes through. The bolt should be tight, so that the bushing is utilized as the pivot point - not the bolt. If you look closely, you shpould have star washers on bothe\ ends of the sissors pivot bolts. The bolt should be tightened so that the washers grasp the bushing, making it the wearing, pivoting componant, instead of the bolt. If you leave it loose enough for the bolt to act as a pivot, you will have shimmy..... That is not to say that the wheel should be in balance, too.
Fly safe - have fun Harry N93530
<<attachment: winmail.dat>>
