Coupers: My coupe has rudder pedals. I've never tried one with out pedals.
So, last Sunday though I would do a quick converison and give it
a try without the pedals. Just take out two bolts, put the cables
back to the orginal holes and ready to go, right, wrong. Cables
would not connect. The left one did, but went to full left rudder
and locked the whole system down. The right cable became several
inches to short. The yoke would turn about 1/4 of a turn.
What would I need to do to go back without pedals, not that
I'm going to. I would just like to see what the difference
is. I've heard the praises both ways and would like to
see what each was like.
Thanks again.
Jack
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
___
|__/_ )\__|
________________| 0 |________________
^^^^^^^^^^^^^|^\(_ /^|^^^^^^^^^^^^^
| | |
( ( )
Jack Lewis
[EMAIL PROTECTED]
ERCOUPE
SN-1692 415-C
N99069
Andrews, Murphy NC (6A3)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<<attachment: winmail.dat>>
