----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Mine are attached with screws and tinnerman plates connecting the heat shield. This way it can come off for the inspection of the muffler. Don't know what it was originally.
Hank Gallagher N47HG ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, August 14, 2000 9:06 AM Subject: [COUPERS] carb heat attachment > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > Anybody know how the little flange that attaches to the heat muff for > carb heat is *supposed* to attach? It looks like it might have been > spot welded since there are 4 holes in the flange but no holes in the > heat muff. If new holes have to be drilled any recommendations on > ways to drill without getting chips/debris down in there that could > work into the carb? > > Keep em flying! > > Joa > > __________________________________________________ > To unsubscribe from this list please send mailto:[EMAIL PROTECTED] > ___________________________________________________________ > T O P I C A The Email You Want. http://www.topica.com/t/16 > Newsletters, Tips and Discussions on Your Favorite Topics __________________________________________________ To unsubscribe from this list please send mailto:[EMAIL PROTECTED] ___________________________________________________________ T O P I C A The Email You Want. http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics
<<attachment: winmail.dat>>
