----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- started the stripping process finally. I'm using Solvent-Kleene D-Zolve GL 15-33 aircraft paint stripper. this product has been advertised in Custom Planes as well as other publications... started with the ailerons, applied the stripper, waited a couple hours for it to thorouly work than applied high pressure water to remove. one application removed about 98% down to bare metal. I was satisfied. than started the second aileron went through the same process. all the paint came off and was surprised to see what looked like zinc chromate primer beneath.....it didn't budge... went through the same process again, still the zinc chromate wouldn't break loose. went through 3 applications and attempted high pressure water removal with no luck. needless to say I was very disappointed with this so called aircraft finish remover. especially at $170 per 5 gal container. has anyone had any success removing zinc chromate primer ? please share regards JoeC N99621
__________________________________________________ To unsubscribe from this list please send mailto:[EMAIL PROTECTED] ___________________________________________________________ T O P I C A The Email You Want. http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics
<<attachment: winmail.dat>>
