----- Original Message -----
From: "Anand Buddhdev" <[EMAIL PROTECTED]>
To: "Bill" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Saturday, April 13, 2002 2:03 PM
Subject: Re: [courier-users] Problems getting ESMTP Auth to work with
courier 3.73.3 & outlook express


> On Sat, Apr 13, 2002 at 01:23:42PM -0700, Bill wrote:
>
> [cut]
>
> > > > SMTP: 18:22:55 [rx] 220 mailbox.hq.knowmadic.com ESMTP
> > > > SMTP: 18:22:55 [tx] EHLO billsdog
> > > > SMTP: 18:22:55 [rx] 250-mailbox.hq.knowmadic.com Ok.
> > > > SMTP: 18:22:55 [rx] 250-AUTH LOGIN CRAM-MD5
> > > > SMTP: 18:22:55 [rx] 250-AUTH=LOGIN CRAM-MD5 X-NETSCAPE-HAS-BUGS
> > > > SMTP: 18:22:55 [rx] 250-STARTTLS
> > > > SMTP: 18:22:55 [rx] 250-XVERP=Courier
> > > > SMTP: 18:22:55 [rx] 250-XEXDATA
> > > > SMTP: 18:22:55 [rx] 250-XSECURITY=NONE,STARTTLS
> > > > SMTP: 18:22:55 [rx] 250-PIPELINING
> > > > SMTP: 18:22:55 [rx] 250-8BITMIME
> > > > SMTP: 18:22:55 [rx] 250-SIZE
> > > > SMTP: 18:22:55 [rx] 250 DSN
> > > > SMTP: 18:22:55 [tx] STARTTLS
> > > > SMTP: 18:22:55 [rx] 220 Ok
> > > > SMTP: 18:22:55 [tx] EHLO billsdog
> > > > SMTP: 18:22:55 [rx] 250-mailbox.hq.knowmadic.com Ok.
> > > > SMTP: 18:22:55 [rx] 250-AUTH PLAIN LOGIN CRAM-MD5
> > > > SMTP: 18:22:55 [rx] 250-AUTH=PLAIN LOGIN CRAM-MD5
X-NETSCAPE-HAS-BUGS
> > > > SMTP: 18:22:55 [rx] 250-XVERP=Courier
> > > > SMTP: 18:22:55 [rx] 250-XEXDATA
> > > > SMTP: 18:22:55 [rx] 250-XSECURITY=NONE,STARTTLS
> > > > SMTP: 18:22:55 [rx] 250-PIPELINING
> > > > SMTP: 18:22:55 [rx] 250-8BITMIME
> > > > SMTP: 18:22:55 [rx] 250-SIZE
> > > > SMTP: 18:22:55 [rx] 250 DSN
> > > > SMTP: 18:22:55 [tx] AUTH LOGIN
> > > > SMTP: 18:22:55 [rx] 334 VXNlcm5hbWU6
> > > > SMTP: 18:22:55 [tx] YnJvdXdlcnM=
> > > > SMTP: 18:22:55 [rx] 334 UGFzc3dvcmQ6
> > > > SMTP: 18:22:55 [tx] YnJvdXdlcnM=
> > > > SMTP: 18:22:55 [rx] 535 Authentication failed.
> > > >
> > > > What is wrong with my configuration, and what must I change to make
this
> > work?
> > >
> > > Your configuration looks fine, and the above Exchange between outlook
> > > and courier esmtpd is also OK. Your auth config indicates that you are
> > > using userdb. Is the user "brouwers" correctly defined in the userdb,
> > > with the right password?
> >
> > Yes.  I reset it with:
> > userdbpw | userdb brouwers set systempw
>
> Just to make sure, did you run "makeuserdb" after the change?

Yes.  Even restarted courier after makeuserdb.


> > I'm using courier 0.37.3.  Are there any know problems in this area?
> > How can I decode the AUTH LOGIN above?
>
> The other possibility is that you're using hosteddomains, and in
> that case, each email account needs to be entered with the domain, eg
> "[EMAIL PROTECTED]" instead of just "brouwers".

Nope.  just locals.

Here's what I get when I start courier (using the init script from the docs)
[root@mailbox etc]# /etc/rc.d/init.d/courier start
Starting Courier mail server: courierfilter authdaemond courierldapaliasd
courierd esmtpd esmtpd-msa imapd-ssl

Does that provide any clues?

Thanks for pointer on how to decode the password.

I've tested the password using the authtest program (from the authlib dir of
the sources)
[root@mailbox authlib]# ./authtest brouwers
Authenticated: module authdaemon
Home directory: /home/virtmail/brouwers
UID/GID: 503/503
AUTHADDR=brouwers
AUTHFULLNAME=<none>
[root@mailbox authlib]# ./authtest brouwers brouwers
Authenticated: module authdaemon
Home directory: /home/virtmail/brouwers
UID/GID: 503/503
AUTHADDR=brouwers
AUTHFULLNAME=<none>

It authenticates fine checking IMAP-SSL, but no good for esmtp-ssl.

Thanks,
Bill

_______________________________________________
courier-users mailing list
[EMAIL PROTECTED]
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users

Reply via email to