----- Original Message -----
From: "Anand Buddhdev" <[EMAIL PROTECTED]>
To: "Bill Deegan" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, April 11, 2002 12:46 AM
Subject: Re: [courier-users] Problems getting ESMTP Auth to work with
courier 3.73.3 & outlook express


> On Wed, Apr 10, 2002 at 06:34:07PM -0700, Bill Deegan wrote:
>
> > Greetings,
> >
> > I know this has to be something simple, but I'm stuck.  I've read
through many many messages
> > in the mailing list archive,and  I still can't figure out what I'm doing
wrong.
> >
> > From my esmtpd config file:
> > >>>grep AUTH esmtpd | grep -v "#"
> > AUTH_REQUIRED="0"
> > AUTHMODULES="authdaemon"
> > ESMTPAUTH="LOGIN CRAM-MD5"
> > AUTHMODULES_WEBADMIN="authdaemon"
> > ESMTPAUTH_WEBADMIN="LOGIN CRAM-MD5"
> > ESMTPAUTH_TLS="PLAIN LOGIN CRAM-MD5"
> > ESMTPAUTH_TLS_WEBADMIN="PLAIN LOGIN CRAM-MD5"
> >
> > from authdaemonrc:
> > authmodulelist="authuserdb authcram"
> > authmodulelistorig="authcustom authcram authuserdb authldap authpgsql
authmysql authpam"
> >
> > I've restarted the server many many times. (After each change I make)
> >
> > user is brouwers
> > password is brouwers
> >
> >
> > Here's a log of the communication from outlook express <-> my mail
server
> > SMTP: 18:22:55 [rx] 220 mailbox.hq.knowmadic.com ESMTP
> > SMTP: 18:22:55 [tx] EHLO billsdog
> > SMTP: 18:22:55 [rx] 250-mailbox.hq.knowmadic.com Ok.
> > SMTP: 18:22:55 [rx] 250-AUTH LOGIN CRAM-MD5
> > SMTP: 18:22:55 [rx] 250-AUTH=LOGIN CRAM-MD5 X-NETSCAPE-HAS-BUGS
> > SMTP: 18:22:55 [rx] 250-STARTTLS
> > SMTP: 18:22:55 [rx] 250-XVERP=Courier
> > SMTP: 18:22:55 [rx] 250-XEXDATA
> > SMTP: 18:22:55 [rx] 250-XSECURITY=NONE,STARTTLS
> > SMTP: 18:22:55 [rx] 250-PIPELINING
> > SMTP: 18:22:55 [rx] 250-8BITMIME
> > SMTP: 18:22:55 [rx] 250-SIZE
> > SMTP: 18:22:55 [rx] 250 DSN
> > SMTP: 18:22:55 [tx] STARTTLS
> > SMTP: 18:22:55 [rx] 220 Ok
> > SMTP: 18:22:55 [tx] EHLO billsdog
> > SMTP: 18:22:55 [rx] 250-mailbox.hq.knowmadic.com Ok.
> > SMTP: 18:22:55 [rx] 250-AUTH PLAIN LOGIN CRAM-MD5
> > SMTP: 18:22:55 [rx] 250-AUTH=PLAIN LOGIN CRAM-MD5 X-NETSCAPE-HAS-BUGS
> > SMTP: 18:22:55 [rx] 250-XVERP=Courier
> > SMTP: 18:22:55 [rx] 250-XEXDATA
> > SMTP: 18:22:55 [rx] 250-XSECURITY=NONE,STARTTLS
> > SMTP: 18:22:55 [rx] 250-PIPELINING
> > SMTP: 18:22:55 [rx] 250-8BITMIME
> > SMTP: 18:22:55 [rx] 250-SIZE
> > SMTP: 18:22:55 [rx] 250 DSN
> > SMTP: 18:22:55 [tx] AUTH LOGIN
> > SMTP: 18:22:55 [rx] 334 VXNlcm5hbWU6
> > SMTP: 18:22:55 [tx] YnJvdXdlcnM=
> > SMTP: 18:22:55 [rx] 334 UGFzc3dvcmQ6
> > SMTP: 18:22:55 [tx] YnJvdXdlcnM=
> > SMTP: 18:22:55 [rx] 535 Authentication failed.
> >
> > What is wrong with my configuration, and what must I change to make this
work?
>
> Your configuration looks fine, and the above Exchange between outlook
> and courier esmtpd is also OK. Your auth config indicates that you are
> using userdb. Is the user "brouwers" correctly defined in the userdb,
> with the right password?

Yes.  I reset it with:
userdbpw | userdb brouwers set systempw

I'm using courier 0.37.3.  Are there any know problems in this area?
How can I decode the AUTH LOGIN above?

Thanks,
Bill


_______________________________________________
courier-users mailing list
[EMAIL PROTECTED]
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users

Reply via email to