I used AUTHMODULES="authdaemon" in imapd and authmodulelist="authcustom authpam" in authdaemonrc
and it worked fine and then i didn't have to add nothign extra to the pam.conf Try this out. By the way I used 127.0.0.1 as the address. -----Original Message----- From: James A Baker To: [EMAIL PROTECTED] Sent: 3/27/2003 7:23 PM Subject: Re: [courier-users] PAM Authentication Problem (Newbie question)? On Thursday, Mar 27, 2003, at 10:54 US/Central, John C. Suomi wrote: >Trying 0.0.0.0 >Connected to 0 >Escape character is '^]'. >*Ok Courier-IMAP ready. Copyright 1998-2002 > >I try to login as user hubert > >a1 login Hubert >a1 NO Error in IMAP command received by server >a3 logout >* BYE Courier-IMAP server shutting down >a3 OK LOGOUT completed >Connection closed by foreign host > > If this is a true transaction of what you sent via telnet, then you need to read the RFC again. http://rfc-editor.org/rfc/rfc2060.txt -- And it's really a good idea anyway when you get *any* protocol error (like the above) by manually typing a command. LOGIN requires 2 arguments. :) -jab ------------------------------------------------------- This SF.net email is sponsored by: The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today! http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en _______________________________________________ courier-users mailing list [EMAIL PROTECTED] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
