Yes, that is what Alexandra did, and that is why it is linked to her account. If she doesn't have chrome open, logged in to google, then the share doesn't work. :(
Jacob --- Office Nomads - Individuality without Isolation http://www.officenomads.com - (206) 323-6500 On Wed, Jun 13, 2012 at 12:43 PM, Matthew Arkin < [email protected]> wrote: > Jacob, you should be able to "Share" printers with Google Cloud Print > http://support.google.com/chromeos/a/bin/answer.py?hl=en&answer=1329537 > > > On Wed, Jun 13, 2012 at 3:37 PM, Jacob Sayles <[email protected]>wrote: > >> We have a lot of traffic with 4 apt buildings surrounding us so there are >> approximately 20-30 competing signals depending on where you sit. We still >> have issues if someone is on 802.11g only (2.4ghz) but most users are on >> the 5ghz band. The full place is wired though so if anyone has issues, we >> just tell them to plug in. When I hear "I'm having wireless issues" I >> check out their laptop and 9 times out of 10 it's an older machine that >> only does 802.11g. >> >> One piece of hardware I would love to find is a google cloud print >> server. Currently anyone needing to print from a chrome book needs >> Alexandra to be logged in to Chrome and it goes through her account. This >> is a horrible solution. Anyone got a better solution? >> >> >> Jacob >> >> --- >> Office Nomads - Individuality without Isolation >> http://www.officenomads.com - (206) 323-6500 >> >> >> On Wed, Jun 13, 2012 at 12:24 PM, Alex Hillman < >> [email protected]> wrote: >> >>> Impressive. How many other wifi access points are within range? >>> >>> I have a feeling that our signal to noise ratio was hurting our ability >>> to run that many devices from even 4 Airport Extremes. >>> >>> I guess the lesson here is "your milage may vary" on any of these pieces >>> of equipment, so don't expect a silver bullet. >>> >>> -- >>> /ah >>> indyhall.org >>> coworking in philadelphia >>> >>> On Wednesday, June 13, 2012 at 3:17 PM, Jacob Sayles wrote: >>> >>> Yes, just one Airport Extreme. At the moment we have 42 devices >>> connected to the wireless out of 63 in the space... but it's also a quiet >>> day. Last Wednesday, our busiest day ever, we had 107 devices in the >>> space. I can't see how many of those were on the wifi. I say "devices" >>> because most users are at least 2 with their phone and their laptop. Today >>> we have 26 members in the space. >>> >>> Jacob >>> >>> --- >>> Office Nomads - Individuality without Isolation >>> http://www.officenomads.com - (206) 323-6500 >>> >>> >>> On Wed, Jun 13, 2012 at 12:09 PM, Alex Hillman < >>> [email protected]> wrote: >>> >>> Just one Airport Extreme How many people share that AP? >>> >>> >>> -- >>> /ah >>> indyhall.org >>> coworking in philadelphia >>> >>> On Wednesday, June 13, 2012 at 3:01 PM, Jacob Sayles wrote: >>> >>> We run pfsense on an old P3 machine and it works great. The WAN >>> fail-over is a little clunky so don't expect seamless transitions. It >>> takes about 10 seconds to switch over and all VPNs, file transfers, etc are >>> dropped. That said, 10 seconds of outage is better then being down. >>> That's why we pay $200/month for a second internet connection. We balance >>> it out by having that line (comcast) handle all our phones (4). >>> >>> Wifi we are happy with our Airport Extreme. 5000sqft and solid coverage. >>> >>> Jacob >>> >>> --- >>> Office Nomads - Individuality without Isolation >>> http://www.officenomads.com - (206) 323-6500 >>> >>> >>> On Mon, Jun 4, 2012 at 8:59 AM, Alex Hillman < >>> [email protected]> wrote: >>> >>> I'm working on a complete redux of the evolution of our networking >>> equipment as we've grown for my blog, I'll share it here when it's done. >>> Here's a bit of a preview of the latest evolution. >>> >>> On the router side of things, we now have a pfSense-based appliance >>> called a Firebox. pfSense is a very robust piece of router software and can >>> be run on a variety of appliances that range in price, but we were able to >>> pick one of the older models (RX6264S) up on EBay for ~$220. >>> >>> pfSense itself is free and open source, but specialized hardware can run >>> it optimally. We looked at new hardware from http://www.hacom.net and >>> it runs $800-1500. >>> >>> It's a LOT more powerful than anything in the consumer arena, handling >>> 1000's of users and millions of connections. Consumer gear starts to slow >>> down with anything north of 50 users. It' usable, but you'll start noticing >>> problems. Also, pfSense gives us REALLY great analytics for finding and >>> squashing problems, like connections that are flooding the network for all >>> users and also gives us really useful tools for giving things that need >>> connection priority (like Skype and SSH connections) over things like >>> Youtube and torrents. >>> >>> For us, that means a much easier to manage "network policy". You can use >>> just about anything on our network, and the router figures out if it's >>> causing problems and throttles the amount of network it has access to. >>> >>> The hardware we bought also allows for bridged WAN, which means we can >>> install a fallback ISP for when our primary ISP is having issues, and that >>> way people don't' ever lose their connection. >>> >>> On the wireless side of things, we tested Meraki and Ruckus and went >>> with Ruckus. Meraki APs seemed to have a shorter range and while the Cloud >>> Control system was badass, we'd never use 99% of it. The sales people were >>> really nice and helpful, but it didn't seem like a good fit for us. >>> >>> Ruckus, on the other hand, was challenging to work with through their >>> normal enterprise sales channels so we went to Ebay again and bought a new >>> AP for 25% off list price and it works awesome. We don't get their >>> enterprise support, but I'm not too worried about it. I'm very happy with >>> the performance of a single access point (covering and supporting >100 >>> users on 2 floors) and plan to buy a 2nd AP to beef up the coverage. We're >>> using the Ruckus 7962 - >>> http://www.ruckuswireless.com/products/zoneflex-indoor/7962 >>> >>> Thanks for the recommendation for Ruckus from the Cambridge Innovation >>> Center crew. I'm a happy customer. >>> >>> I also strongly recommend NetSpot (www.netspotapp.com) for doing a site >>> survey, which I was recommended by Chris Johnson (copied on this email). >>> It's a free app that lets you do a heat map of signal strength and signal >>> to noise ratios. It gave me a TON of insight into placement and the >>> resulting coverage of wifi. Probably the most useful tool I learned about >>> last month! >>> >>> -Alex >>> >>> >>> >>> >>> >>> >>> >>> >>> -- >>> /ah >>> indyhall.org >>> coworking in philadelphia >>> >>> On Monday, June 4, 2012 at 11:34 AM, Angel Kwiatkowski wrote: >>> >>> I lied, we use Netgear routers. They're odd. They needed to be restarted >>> constantly when we first moved in but now run very smoothly. >>> >>> On Sunday, June 3, 2012 8:55:04 PM UTC-6, Angel Kwiatkowski wrote: >>> >>> We use Dlink routers. One in the basement conference room where the >>> juice line comes in that's hardwired up to the 3rd floor where most of the >>> coworking happens. Both are activated for wireless. Additionally, I think >>> the guys ran hard wires all the way upstairs and then hooked up a couple of >>> switches. Several people hard wire in while at Cohere but the majority >>> don't. >>> We have 5-10 people in the space at any time and we have Comcast Biz >>> class 50/10 for $200/mo. It all depends on how your city is wired up. We >>> have some special consideration being just a couple of blocks away from a >>> large university here. >>> >>> Angel >>> >>> On Thursday, August 25, 2011 9:09:58 AM UTC-6, JJ wrote: >>> >>> Hey all, >>> >>> Without getting into too much introduction and details, I'll just cut >>> right to it. >>> >>> I'm opening a space next week in South Dakota. Working on finalizing >>> details right now, and one thing I'm not too sure about is internet. We've >>> got 20 members or so pre-signed to move in day 1 and in trying to plan for >>> the future, am trying to figure out what sort of internet speed I need, and >>> what sort of router to handle the space's size and amount of people. It's >>> a long space, about 150ft, and we could very easily have 100 people >>> accessing the network at any given time. >>> >>> Any of the larger spaces out there have insight? I'm currently looking >>> at an internet speed of 50 down/10up or 100 down/15 up. Also am looking at >>> 801.11n routers that have two to three adjustable networks built into the >>> device. >>> >>> Would love some thoughts. >>> >>> Best, >>> >>> >>> *Josh Aberson* >>> [email protected] >>> m: 521.6158 | @JoshAberson >>> >>> >>> >>> 220 S. Phillips Ave. >>> Sioux Falls, SD 57104 >>> fb.com/workmeso >>> @workmeso >>> www.WorkMeso.com >>> >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Coworking" group. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msg/coworking/-/OnmcNoyj3esJ. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/coworking?hl=en. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Coworking" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/coworking?hl=en. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Coworking" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/coworking?hl=en. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Coworking" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/coworking?hl=en. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Coworking" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/coworking?hl=en. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Coworking" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/coworking?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Coworking" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/coworking?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "Coworking" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/coworking?hl=en. > -- You received this message because you are subscribed to the Google Groups "Coworking" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/coworking?hl=en.
