As a follow-up, does crowbar set/change the BMC account/password information during provisioning?
~jpr On 12/19/2013 01:56 PM, John-Paul Robinson wrote: > Thanks Rajeev. > > This command listed the BMC addresses. > > The Crowbar node inventory.csv did not list these IP addresses though. > > ~jpr > > > On 12/18/2013 10:41 PM, [email protected] wrote: >> >> *Dell - Internal Use - Confidential * >> >> John-Paul >> >> >> >> This information is usually listed for each node in the UI -- >> alternately you can run a simple command on the admin to get the info >> -- example below >> >> >> >> root@admin:~# knife search node name:* -a 'crowbar.network.bmc.address' >> >> 2 items found >> >> >> >> crowbar.network.bmc.address: 192.168.124.163 >> >> id: d78-45-c4-fb-4d-b7.mesabld3860.org >> >> >> >> crowbar.network.bmc.address: 192.168.124.168 >> >> id: admin.mesabld3860.org >> >> >> >> >> >> Regards, >> >> Raajeev >> >> >> >> *From:*crowbar-bounces *On Behalf Of *Hirschfeld, Rob >> *Sent:* Wednesday, December 18, 2013 4:57 PM >> *To:* [email protected]; crowbar >> *Subject:* Re: [Crowbar] record of IP's assigned to bmc_vlan >> >> >> >> John-Paul, >> >> I'm going from memory -- someone else may have a more specific answer... >> >> This data should be provided in the Crowbar UI for the Node. I think >> there's a list of all the assigned IPs with their associated network. >> >> If you want the raw data, there are two places to look for this >> information in the Chef database: both are Chef Roles. Check the >> "wall" in the crowbar-node-Name role's metadata and also the >> "bc-network-default" or similar where Crowbar maintain's network >> information. >> >> Hopefully someone else can give you a more precise answer. >> >> Rob >> >> -----Original Message----- >> From: crowbar-bounces On Behalf Of John-Paul Robinson >> Sent: Wednesday, December 18, 2013 2:52 PM >> To: crowbar >> Subject: [Crowbar] record of IP's assigned to bmc_vlan >> >> Hi, >> >> Where does crowbar record the IP addresses assigned to devices in the >> bmc_vlan? >> >> Specifically, I want to use ipmi from the admin node to interface >> with the idrac cards and can't find which IP's were assigned to these >> interfaces. >> >> I'm assuming this is handled by crowbar. >> >> Thanks, >> >> ~jpr >> >> _______________________________________________ >> Crowbar mailing list >> [email protected] <mailto:[email protected]> >> https://lists.us.dell.com/mailman/listinfo/crowbar >> For more information: http://crowbar.github.com/ >> > > > > _______________________________________________ > Crowbar mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/crowbar > For more information: http://crowbar.github.com/
_______________________________________________ Crowbar mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/crowbar For more information: http://crowbar.github.com/
