I did not know off hand but I found this in the docs and assuming you use the default, it should help
Table 24: IPMI Barclamp Parameters Name Default Description bmc_enable true Controls if the barclamp attempts to work on the BMC. bmc_password cr0wBar! The password that will be configured on the BMC. bmc_user root The username that will be configured on the BMC. debug true Turns on more verbose output. From: crowbar-bounces On Behalf Of John-Paul Robinson Sent: Thursday, December 19, 2013 2:16 PM To: crowbar Subject: Re: [Crowbar] record of IP's assigned to bmc_vlan As a follow-up, does crowbar set/change the BMC account/password information during provisioning? ~jpr On 12/19/2013 01:56 PM, John-Paul Robinson wrote: Thanks Rajeev. This command listed the BMC addresses. The Crowbar node inventory.csv did not list these IP addresses though. ~jpr On 12/18/2013 10:41 PM, [email protected]<mailto:[email protected]> wrote: Dell - Internal Use - Confidential John-Paul This information is usually listed for each node in the UI - alternately you can run a simple command on the admin to get the info - example below root@admin:~# knife search node name:* -a 'crowbar.network.bmc.address' 2 items found crowbar.network.bmc.address: 192.168.124.163 id: d78-45-c4-fb-4d-b7.mesabld3860.org crowbar.network.bmc.address: 192.168.124.168 id: admin.mesabld3860.org Regards, Raajeev From: crowbar-bounces On Behalf Of Hirschfeld, Rob Sent: Wednesday, December 18, 2013 4:57 PM To: [email protected]<mailto:[email protected]>; crowbar Subject: Re: [Crowbar] record of IP's assigned to bmc_vlan John-Paul, I'm going from memory - someone else may have a more specific answer... This data should be provided in the Crowbar UI for the Node. I think there's a list of all the assigned IPs with their associated network. If you want the raw data, there are two places to look for this information in the Chef database: both are Chef Roles. Check the "wall" in the crowbar-node-Name role's metadata and also the "bc-network-default" or similar where Crowbar maintain's network information. Hopefully someone else can give you a more precise answer. Rob -----Original Message----- From: crowbar-bounces On Behalf Of John-Paul Robinson Sent: Wednesday, December 18, 2013 2:52 PM To: crowbar Subject: [Crowbar] record of IP's assigned to bmc_vlan Hi, Where does crowbar record the IP addresses assigned to devices in the bmc_vlan? Specifically, I want to use ipmi from the admin node to interface with the idrac cards and can't find which IP's were assigned to these interfaces. I'm assuming this is handled by crowbar. Thanks, ~jpr _______________________________________________ Crowbar mailing list [email protected]<mailto:[email protected]> https://lists.us.dell.com/mailman/listinfo/crowbar For more information: http://crowbar.github.com/ _______________________________________________ Crowbar mailing list [email protected]<mailto:[email protected]> https://lists.us.dell.com/mailman/listinfo/crowbar For more information: http://crowbar.github.com/
_______________________________________________ Crowbar mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/crowbar For more information: http://crowbar.github.com/
