Well, the coil overs that I had bought (R1 coils) turned out to be missing some parts. So after waiting weeks for the exchange to show up, the shop that I got them from hooked me up with a different set instead. These are BrandX coils, and from what they tell me are a little higher grade set up.
HOWEVER! Still no instructions on how to install. I believe I have it figured out, but I want to make sure....There is a picture with them, but it's pretty unclear of all the parts. The set comes with 10 large o-rings, and 10 small ones. Before I realized that there was a difference in size, I took the big ones, and rolled them over the shaft of the shock, and down around the base of the shock, into the cradle. The rubber spacer, then goes around those, and then the adjustable sleeve goes down around that, and then the spring on top of that. My big concern is this though. I used all the big ones in the rear. Now I need to do the front, but only have the smaller ones, which are almost half the size in thickness, but same diameter in size. Can anyone tell me what the HELL the black o-rings are used for? Thanks! __________________________________________________ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com
