Yup, no front mount, and the speedo cable works fine with the B16A. Fred
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Henry Bonath Sent: Friday, January 17, 2003 2:36 PM To: Ronnie Overby Cc: CRX Mailing List Subject: Re: CRX: new b16a swap questions..(maybe the last...but probablynot) Nope, you just use the left, right, and rear mounts.. as far as the speedo cable goes, it should work AFAIK I know it does with a USDM B18A/Teg LS Tranny -Henry On Fri, 2003-01-17 at 15:25, Ronnie Overby wrote: > for those of you who may know.... > > when swapping the b16 into the 88 si....i didnt get a front mount from hasport....does the front of the engine/transmission use the stock motor mount from the crx....or do i not mount it at all (which doesn't seem right to me...but im no mech) > > also will my speedo cable from the crx match the si transmission that came with my b16a > > TIA > Ronnie > 88 crx si
