|
One of the ways that I fish stuff through my Civic
and passed ways in my CRX is to take a clothes hanger and straighten it
out. Tape the speaker wire to the clothes hanger and thread it just like a
needle. Simple, easy and cheap :D
----- Original Message -----
Sent: Monday, February 10, 2003 12:43
PM
Subject: Re: CRX: Door speaker wires on
the CRX
Threading any wire thru door panels and jambs are a pain. I do alot of work
in those areas with electronic installs, and the tried and tested method for
me is to buy the large zip ties around 8 to 12 inches long. Zip a tie all
the way to make a small enough loop that will pass thru the hole, then tie
your speaker wire (one at a time for easier pulling) onto the loop. The zip
tie serves as the guide thru the hole, so just push it thru the hole and grab
it on the other side with your hand when you feel it. Good Luck!
Ken <[EMAIL PROTECTED]> wrote:
Hi,
I am hoping that someone could help me out here. I am trying to install
some higher grade speaker wires into the doors, but I can't seem to
thread
the wires from the dash area to the doors. Looking into the door
hinged
area, I see some rubber grommets where wires can be threaded
through, but I
can't for the life of me fish them through, without
removing the door or
the dash which I don't really want to do. Does
anybody have any ideas on
how to do this easily?
Thanks.
Ken
90si
Michael Mishler
Kognition Design
http://www.kognitiondesign.com
Do you Yahoo!?
Yahoo! Mail
Plus - Powerful. Affordable. Sign up
now
|
