On 17 April 2014 16:10, Masao Uebayashi <uebay...@gmail.com> wrote: > Could you revert kern_exec.c and bisect?
Went back as far as 1.376 with the same result. Noticed that when I went down to 1.377 'make depend' forced the recompilation of a bunch of raidframe code, so my very uneducated guess is that this panic has to do with the fact that my root is on raid set. Chavdar > > Masao > > On Thu, Apr 17, 2014 at 8:16 PM, Chavdar Ivanov <ci4...@gmail.com> wrote: >> Hi, >> >> Unmodified GENERIC as of 07/04/2014 (6.99.40) works fine, dmesg follows: >> >> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, >> 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 >> The NetBSD Foundation, Inc. All rights reserved. >> Copyright (c) 1982, 1986, 1989, 1991, 1993 >> The Regents of the University of California. All rights reserved. >> >> NetBSD 6.99.40 (GENERIC) #0: Tue Apr 8 13:10:32 BST 2014 >> sysbuild@support6.delcam.local:/home/sysbuild/Sysbuild/amd64/obj/home/sysbuild/src/sys/arch/amd64/compile/GENERIC >> total memory = 3071 MB >> avail memory = 2965 MB >> timecounter: Timecounters tick every 10.000 msec >> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 >> AMD Rhapsody (Rev 4) >> mainbus0 (root) >> ACPI: RSDP 0xf6fc0 000024 (v02 PTLTD ) >> ACPI: XSDT 0xbff7b450 00003C (v01 PTLTD XSDT 06040000 LTP 00000000) >> ACPI: FACP 0xbff7ee46 0000F4 (v03 AMD HAMMER 06040000 PTEC 000F4240) >> ACPI: DSDT 0xbff7b48c 003946 (v01 AMD-K8 AMDACPI 06040000 MSFT 0100000E) >> ACPI: FACS 0xbff7ffc0 000040 >> ACPI: APIC 0xbff7ef3a 000076 (v01 PTLTD APIC 06040000 LTP 00000000) >> ACPI: SPCR 0xbff7efb0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) >> ACPI: All ACPI Tables successfully acquired >> cpu0 at mainbus0 apid 0: AMD Opteron(tm) Processor 246, id 0xf5a >> cpu0: erratum 86 present >> cpu0: erratum 104 present >> cpu0: erratum 101 present >> cpu0: WARNING: errata present, BIOS upgrade may be >> cpu0: WARNING: necessary to ensure reliable operation >> cpu1 at mainbus0 apid 1: AMD Opteron(tm) Processor 246, id 0xf5a >> ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 24 pins >> ioapic1 at mainbus0 apid 3: pa 0xf0000000, version 0x11, 4 pins >> ioapic2 at mainbus0 apid 4: pa 0xf0001000, version 0x11, 4 pins >> acpi0 at mainbus0: Intel ACPICA 20131218 >> acpi0: X/RSDT: OemId <PTLTD , XSDT ,06040000>, AslId < LTP,00000000> >> acpi0: SCI interrupting at int 9 >> timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 >> acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button >> attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 >> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 >> midi0 at pcppi1: PC speaker >> sysbeep0 at pcppi1 >> SYSR (PNP0C02) at acpi0 not configured >> pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 >> pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 >> FDC0 (PNP0700) at acpi0 not configured >> UAR1 (PNP0501) at acpi0 not configured >> UAR2 (PNP0501) at acpi0 not configured >> LPT (PNP0400) at acpi0 not configured >> ACPI: Enabled 1 GPEs in block 00 to 0F >> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] >> (20131218/hwxface-646) >> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] >> (20131218/hwxface-646) >> attimer1: attached to pcppi1 >> pckbd0 at pckbc2 (kbd slot) >> pckbc2: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard >> pms0 at pckbc2 (aux slot) >> pckbc2: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pci0 at mainbus0 bus 0: configuration mode 1 >> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok >> pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x7454 (rev. 0x13) >> agp0 at pchb0: 2 Miscellaneous Control unit(s) found. >> agp0: aperture at 0xe0000000, size 0x10000000 >> ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x7455 (rev. 0x13) >> pci1 at ppb0 bus 1 >> pci1: i/o space, memory space enabled >> vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x4154 (rev. 0x80) >> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 >> wsmux1: connecting to wsdisplay0 >> radeondrm0 at vga0: ATI FireGL AT T2 >> radeondrm0: AGP at 0xe0000000 256MB >> radeondrm0: Initialized radeon 1.29.0 20080613 >> ppb1 at pci0 dev 6 function 0: vendor 0x1022 product 0x7460 (rev. 0x07) >> pci2 at ppb1 bus 2 >> pci2: i/o space, memory space enabled >> ohci0 at pci2 dev 0 function 0: vendor 0x1022 product 0x7464 (rev. 0x0b) >> ohci0: interrupting at ioapic0 pin 19 >> ohci0: OHCI version 1.0, legacy support >> usb0 at ohci0: USB revision 1.0 >> ohci1 at pci2 dev 0 function 1: vendor 0x1022 product 0x7464 (rev. 0x0b) >> ohci1: interrupting at ioapic0 pin 19 >> ohci1: OHCI version 1.0, legacy support >> usb1 at ohci1: USB revision 1.0 >> ohci2 at pci2 dev 4 function 0: vendor 0x1033 product 0x0035 (rev. 0x41) >> ohci2: interrupting at ioapic0 pin 17 >> ohci2: OHCI version 1.0 >> usb2 at ohci2: USB revision 1.0 >> ohci3 at pci2 dev 4 function 1: vendor 0x1033 product 0x0035 (rev. 0x41) >> ohci3: interrupting at ioapic0 pin 18 >> ohci3: OHCI version 1.0 >> usb3 at ohci3: USB revision 1.0 >> ehci0 at pci2 dev 4 function 2: vendor 0x1033 product 0x00e0 (rev. 0x02) >> ehci0: interrupting at ioapic0 pin 19 >> ehci0: EHCI version 0.95 >> ehci0: companion controllers, 3 ports each: ohci2 ohci3 >> usb4 at ehci0: USB revision 2.0 >> bge0 at pci2 dev 5 function 0: Broadcom BCM5705 Gigabit Ethernet >> bge0: interrupting at ioapic0 pin 19 >> bge0: HW config 00000155, 00000015, 00000000, 00000000 >> bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:0f:ea:5d:15:a1 >> bge0: setting short Tx thresholds >> brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2 >> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >> 1000baseT-FDX, auto >> satalink0 at pci2 dev 6 function 0: Silicon Image SATALink 3114 (rev. 0x02) >> satalink0: 33MHz PCI bus >> satalink0: bus-master DMA support present >> satalink0: using ioapic0 pin 18 for native-PCI interrupt >> atabus0 at satalink0 channel 0 >> atabus1 at satalink0 channel 1 >> atabus2 at satalink0 channel 2 >> atabus3 at satalink0 channel 3 >> pcib0 at pci0 dev 7 function 0: vendor 0x1022 product 0x7468 (rev. 0x05) >> viaide0 at pci0 dev 7 function 1: AMD AMD8111 IDE Controller (rev. 0x03) >> viaide0: bus-master DMA support present >> viaide0: primary channel configured to compatibility mode >> viaide0: primary channel interrupting at ioapic0 pin 14 >> atabus4 at viaide0 channel 0 >> viaide0: secondary channel configured to compatibility mode >> viaide0: secondary channel interrupting at ioapic0 pin 15 >> atabus5 at viaide0 channel 1 >> amdpm0 at pci0 dev 7 function 3: vendor 0x1022 product 0x746b (rev. 0x05) >> timecounter: Timecounter "amdpm0" frequency 3579545 Hz quality 1000 >> amdpm0: 24-bit timer >> iic at amdpm0 not configured >> amdpm0: random number generator enabled (apprx. 57ms) >> pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00) >> pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00) >> pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00) >> amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration >> pchb4 at pci0 dev 25 function 0: vendor 0x1022 product 0x1100 (rev. 0x00) >> pchb5 at pci0 dev 25 function 1: vendor 0x1022 product 0x1101 (rev. 0x00) >> pchb6 at pci0 dev 25 function 2: vendor 0x1022 product 0x1102 (rev. 0x00) >> amdnb_misc1 at pci0 dev 25 function 3: AMD NB Misc Configuration >> isa0 at pcib0 >> lpt0 at isa0 port 0x378-0x37b irq 7 >> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo >> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo >> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 >> pci3 at mainbus0 bus 8 >> pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok >> ppb2 at pci3 dev 3 function 0: vendor 0x1022 product 0x7450 (rev. 0x12) >> pci4 at ppb2 bus 9 >> pci4: i/o space, memory space enabled >> rtk0 at pci4 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) >> rtk0: interrupting at ioapic1 pin 1 >> rtk0: Ethernet address 00:c0:df:13:2a:be >> rlphy0 at rtk0 phy 7: Realtek internal PHY >> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> aapic0 at pci3 dev 3 function 1: vendor 0x1022 product 0x7451 (rev. 0x01) >> ppb3 at pci3 dev 4 function 0: vendor 0x1022 product 0x7450 (rev. 0x12) >> pci5 at ppb3 bus 14 >> pci5: i/o space, memory space enabled >> pdcsata0 at pci5 dev 2 function 0: Promise PDC20375 SATA150 controller >> (rev. 0x02) >> pdcsata0: interrupting at ioapic2 pin 2 >> pdcsata0: bus-master DMA support present >> atabus6 at pdcsata0 channel 0 >> atabus7 at pdcsata0 channel 1 >> atabus8 at pdcsata0 channel 2 >> aapic1 at pci3 dev 4 function 1: vendor 0x1022 product 0x7451 (rev. 0x01) >> acpicpu0 at cpu0: ACPI CPU >> acpicpu0: C1: HLT, lat 0 us, pow 0 mW >> acpicpu1 at cpu1: ACPI CPU >> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 >> satalink0: port 0: device present, speed: 1.5Gb/s >> satalink0: port 1: device present, speed: 1.5Gb/s >> satalink0: port 2: device present, speed: 1.5Gb/s >> satalink0: port 3: device present, speed: 1.5Gb/s >> wd0 at atabus0 drive 0 >> wd0: <WDC WD360GD-00FNA0> >> wd0: drive supports 16-sector PIO transfers, LBA48 addressing >> wd0: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors >> uhub0 at usb1: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub0: 3 ports with 3 removable, self powered >> uhub1 at usb3: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub1: 2 ports with 2 removable, self powered >> uhub2 at usb0: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub2: 3 ports with 3 removable, self powered >> uhub3 at usb2: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub3: 3 ports with 3 removable, self powered >> uhub4 at usb4: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >> uhub4: 5 ports with 5 removable, self powered >> wd0: 32-bit data port >> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >> wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >> DMA) >> wd1 at atabus1 drive 0 >> wd1: <ST3120827AS> >> wd1: drive supports 16-sector PIO transfers, LBA48 addressing >> wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors >> wd1: GPT GUID: ef1257a1-6735-11e3-b719-000fea5d15a1 >> pdcsata0 port 1: device present, speed: 1.5Gb/s >> pdcsata0 port 0: device present, speed: 1.5Gb/s >> dk0 at wd1: ef1257d9-6735-11e3-b719-000fea5d15a1 >> dk0: 234441581 blocks at 34, type: ffs >> wd1: 32-bit data port >> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >> wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >> DMA) >> wd2 at atabus2 drive 0 >> wd2: <WDC WD360ADFD-00NLR4> >> wd2: drive supports 16-sector PIO transfers, LBA48 addressing >> wd2: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors >> wd2: 32-bit data port >> wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >> wd2(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >> DMA) >> wd3 at atabus3 drive 0 >> wd3: <WDC WD360ADFD-00NLR5> >> wd3: drive supports 16-sector PIO transfers, LBA48 addressing >> wd3: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors >> wd3: 32-bit data port >> wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >> wd3(satalink0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >> DMA) >> wd4 at atabus6 drive 0 >> uhidev0 at uhub0 port 2 configuration 1 interface 0 >> uhidev0: HP HP USB Laser Mouse, rev 2.00/31.00, addr 2, iclass 3/1 >> ums0 at uhidev0: 3 buttons, W and Z dirs >> wsmouse1 at ums0 mux 0 >> pdcsata0:0:0: lost interrupt >> type: ata tc_bcount: 512 tc_skip: 0 >> wd4: <ST3120827AS> >> wd4: drive supports 16-sector PIO transfers, LBA48 addressing >> wd4: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors >> wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >> wd4(pdcsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) >> wd5 at atabus7 drive 0 >> pdcsata0:1:0: lost interrupt >> type: ata tc_bcount: 512 tc_skip: 0 >> wd5: <ST3120827AS> >> wd5: drive supports 16-sector PIO transfers, LBA48 addressing >> wd5: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors >> wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >> wd5(pdcsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) >> Kernelized RAIDframe activated >> pad0: outputs: 44100Hz, 16-bit, stereo >> audio0 at pad0: half duplex, playback, capture >> raid1: RAID Level 5 >> raid1: Components: /dev/wd0a /dev/wd2a /dev/wd3a >> raid1: Total Sectors: 144607360 (70609 MB) >> raid1: GPT GUID: 5b5a0aae-1568-11e3-8834-000fea5d15a1 >> dk1 at raid1: 5b5a0ae5-1568-11e3-8834-000fea5d15a1 >> dk1: 144607293 blocks at 34, type: ffs >> raid0: RAID Level 1 >> raid0: Components: /dev/wd5a /dev/wd4a >> raid0: Total Sectors: 234441472 (114473 MB) >> boot device: raid0 >> root on raid0a dumps on raid0b >> root file system type: ffs >> wsdisplay0: screen 1 added (80x25, vt100 emulation) >> wsdisplay0: screen 2 added (80x25, vt100 emulation) >> wsdisplay0: screen 3 added (80x25, vt100 emulation) >> wsdisplay0: screen 4 added (80x25, vt100 emulation) >> >> ---- >> Sometimes later (I can't yet find out exactly when, I might try again >> bisecting) I get: >> >> .... >> root file system type: ffs >> fatal protection fauilt in supervisor mode >> trap type 4 code 0 rip ffffffff80511a2a cs 8 rflags 10246 cr2 >> ffff800036c88000 ilevel 0 rsp fffffe8006d08a20 >> curlwp 0xfffffe8006d4da00 pid 1.1 lowest kstack 0xfffffe8006d052c0 >> kernel: protection fault trap, code=0 >> Stopped in pid 1.1 (init) at netbsd:check_exec+0x319: call >> *8(%rax) >> >> db{1}> bt >> check_exec() at netbsd:check_exec+0x319 >> execve_loadvm() at netbsd:execve_loadvm+0x1ca >> execve1() at netbsd:execve1+0x28 >> start_init() at netbsd:start_init+0x26f >> db{1}> >> >> -- >> >> (that is with a kernel from yesterday; same with the todays one). >> ---- >> >> Chavdar Ivanov -- ----