The panic still takes place with a kernel from this night, kern_exec.c v. 1.406.
Chavdar On 17 April 2014 17:04, Chavdar Ivanov <[email protected]> wrote: > On 17 April 2014 16:10, Masao Uebayashi <[email protected]> wrote: >> Could you revert kern_exec.c and bisect? > > Went back as far as 1.376 with the same result. Noticed that when I > went down to 1.377 'make depend' forced the recompilation of a bunch > of raidframe code, so my very uneducated guess is that this panic has > to do with the fact that my root is on raid set. > > Chavdar > > >> >> Masao >> >> On Thu, Apr 17, 2014 at 8:16 PM, Chavdar Ivanov <[email protected]> wrote: >>> Hi, >>> >>> Unmodified GENERIC as of 07/04/2014 (6.99.40) works fine, dmesg follows: >>> >>> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, >>> 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 >>> The NetBSD Foundation, Inc. All rights reserved. >>> Copyright (c) 1982, 1986, 1989, 1991, 1993 >>> The Regents of the University of California. All rights reserved. >>> >>> NetBSD 6.99.40 (GENERIC) #0: Tue Apr 8 13:10:32 BST 2014 >>> [email protected]:/home/sysbuild/Sysbuild/amd64/obj/home/sysbuild/src/sys/arch/amd64/compile/GENERIC >>> total memory = 3071 MB >>> avail memory = 2965 MB >>> timecounter: Timecounters tick every 10.000 msec >>> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 >>> AMD Rhapsody (Rev 4) >>> mainbus0 (root) >>> ACPI: RSDP 0xf6fc0 000024 (v02 PTLTD ) >>> ACPI: XSDT 0xbff7b450 00003C (v01 PTLTD XSDT 06040000 LTP 00000000) >>> ACPI: FACP 0xbff7ee46 0000F4 (v03 AMD HAMMER 06040000 PTEC 000F4240) >>> ACPI: DSDT 0xbff7b48c 003946 (v01 AMD-K8 AMDACPI 06040000 MSFT 0100000E) >>> ACPI: FACS 0xbff7ffc0 000040 >>> ACPI: APIC 0xbff7ef3a 000076 (v01 PTLTD APIC 06040000 LTP 00000000) >>> ACPI: SPCR 0xbff7efb0 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) >>> ACPI: All ACPI Tables successfully acquired >>> cpu0 at mainbus0 apid 0: AMD Opteron(tm) Processor 246, id 0xf5a >>> cpu0: erratum 86 present >>> cpu0: erratum 104 present >>> cpu0: erratum 101 present >>> cpu0: WARNING: errata present, BIOS upgrade may be >>> cpu0: WARNING: necessary to ensure reliable operation >>> cpu1 at mainbus0 apid 1: AMD Opteron(tm) Processor 246, id 0xf5a >>> ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 24 pins >>> ioapic1 at mainbus0 apid 3: pa 0xf0000000, version 0x11, 4 pins >>> ioapic2 at mainbus0 apid 4: pa 0xf0001000, version 0x11, 4 pins >>> acpi0 at mainbus0: Intel ACPICA 20131218 >>> acpi0: X/RSDT: OemId <PTLTD , XSDT ,06040000>, AslId < LTP,00000000> >>> acpi0: SCI interrupting at int 9 >>> timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 >>> acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button >>> attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 >>> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 >>> midi0 at pcppi1: PC speaker >>> sysbeep0 at pcppi1 >>> SYSR (PNP0C02) at acpi0 not configured >>> pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 >>> pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 >>> FDC0 (PNP0700) at acpi0 not configured >>> UAR1 (PNP0501) at acpi0 not configured >>> UAR2 (PNP0501) at acpi0 not configured >>> LPT (PNP0400) at acpi0 not configured >>> ACPI: Enabled 1 GPEs in block 00 to 0F >>> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] >>> (20131218/hwxface-646) >>> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] >>> (20131218/hwxface-646) >>> attimer1: attached to pcppi1 >>> pckbd0 at pckbc2 (kbd slot) >>> pckbc2: using irq 1 for kbd slot >>> wskbd0 at pckbd0: console keyboard >>> pms0 at pckbc2 (aux slot) >>> pckbc2: using irq 12 for aux slot >>> wsmouse0 at pms0 mux 0 >>> pci0 at mainbus0 bus 0: configuration mode 1 >>> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok >>> pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x7454 (rev. 0x13) >>> agp0 at pchb0: 2 Miscellaneous Control unit(s) found. >>> agp0: aperture at 0xe0000000, size 0x10000000 >>> ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x7455 (rev. 0x13) >>> pci1 at ppb0 bus 1 >>> pci1: i/o space, memory space enabled >>> vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x4154 (rev. 0x80) >>> wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 >>> wsmux1: connecting to wsdisplay0 >>> radeondrm0 at vga0: ATI FireGL AT T2 >>> radeondrm0: AGP at 0xe0000000 256MB >>> radeondrm0: Initialized radeon 1.29.0 20080613 >>> ppb1 at pci0 dev 6 function 0: vendor 0x1022 product 0x7460 (rev. 0x07) >>> pci2 at ppb1 bus 2 >>> pci2: i/o space, memory space enabled >>> ohci0 at pci2 dev 0 function 0: vendor 0x1022 product 0x7464 (rev. 0x0b) >>> ohci0: interrupting at ioapic0 pin 19 >>> ohci0: OHCI version 1.0, legacy support >>> usb0 at ohci0: USB revision 1.0 >>> ohci1 at pci2 dev 0 function 1: vendor 0x1022 product 0x7464 (rev. 0x0b) >>> ohci1: interrupting at ioapic0 pin 19 >>> ohci1: OHCI version 1.0, legacy support >>> usb1 at ohci1: USB revision 1.0 >>> ohci2 at pci2 dev 4 function 0: vendor 0x1033 product 0x0035 (rev. 0x41) >>> ohci2: interrupting at ioapic0 pin 17 >>> ohci2: OHCI version 1.0 >>> usb2 at ohci2: USB revision 1.0 >>> ohci3 at pci2 dev 4 function 1: vendor 0x1033 product 0x0035 (rev. 0x41) >>> ohci3: interrupting at ioapic0 pin 18 >>> ohci3: OHCI version 1.0 >>> usb3 at ohci3: USB revision 1.0 >>> ehci0 at pci2 dev 4 function 2: vendor 0x1033 product 0x00e0 (rev. 0x02) >>> ehci0: interrupting at ioapic0 pin 19 >>> ehci0: EHCI version 0.95 >>> ehci0: companion controllers, 3 ports each: ohci2 ohci3 >>> usb4 at ehci0: USB revision 2.0 >>> bge0 at pci2 dev 5 function 0: Broadcom BCM5705 Gigabit Ethernet >>> bge0: interrupting at ioapic0 pin 19 >>> bge0: HW config 00000155, 00000015, 00000000, 00000000 >>> bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:0f:ea:5d:15:a1 >>> bge0: setting short Tx thresholds >>> brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2 >>> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >>> 1000baseT-FDX, auto >>> satalink0 at pci2 dev 6 function 0: Silicon Image SATALink 3114 (rev. 0x02) >>> satalink0: 33MHz PCI bus >>> satalink0: bus-master DMA support present >>> satalink0: using ioapic0 pin 18 for native-PCI interrupt >>> atabus0 at satalink0 channel 0 >>> atabus1 at satalink0 channel 1 >>> atabus2 at satalink0 channel 2 >>> atabus3 at satalink0 channel 3 >>> pcib0 at pci0 dev 7 function 0: vendor 0x1022 product 0x7468 (rev. 0x05) >>> viaide0 at pci0 dev 7 function 1: AMD AMD8111 IDE Controller (rev. 0x03) >>> viaide0: bus-master DMA support present >>> viaide0: primary channel configured to compatibility mode >>> viaide0: primary channel interrupting at ioapic0 pin 14 >>> atabus4 at viaide0 channel 0 >>> viaide0: secondary channel configured to compatibility mode >>> viaide0: secondary channel interrupting at ioapic0 pin 15 >>> atabus5 at viaide0 channel 1 >>> amdpm0 at pci0 dev 7 function 3: vendor 0x1022 product 0x746b (rev. 0x05) >>> timecounter: Timecounter "amdpm0" frequency 3579545 Hz quality 1000 >>> amdpm0: 24-bit timer >>> iic at amdpm0 not configured >>> amdpm0: random number generator enabled (apprx. 57ms) >>> pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00) >>> pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00) >>> pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00) >>> amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration >>> pchb4 at pci0 dev 25 function 0: vendor 0x1022 product 0x1100 (rev. 0x00) >>> pchb5 at pci0 dev 25 function 1: vendor 0x1022 product 0x1101 (rev. 0x00) >>> pchb6 at pci0 dev 25 function 2: vendor 0x1022 product 0x1102 (rev. 0x00) >>> amdnb_misc1 at pci0 dev 25 function 3: AMD NB Misc Configuration >>> isa0 at pcib0 >>> lpt0 at isa0 port 0x378-0x37b irq 7 >>> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo >>> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo >>> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 >>> pci3 at mainbus0 bus 8 >>> pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok >>> ppb2 at pci3 dev 3 function 0: vendor 0x1022 product 0x7450 (rev. 0x12) >>> pci4 at ppb2 bus 9 >>> pci4: i/o space, memory space enabled >>> rtk0 at pci4 dev 1 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) >>> rtk0: interrupting at ioapic1 pin 1 >>> rtk0: Ethernet address 00:c0:df:13:2a:be >>> rlphy0 at rtk0 phy 7: Realtek internal PHY >>> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> aapic0 at pci3 dev 3 function 1: vendor 0x1022 product 0x7451 (rev. 0x01) >>> ppb3 at pci3 dev 4 function 0: vendor 0x1022 product 0x7450 (rev. 0x12) >>> pci5 at ppb3 bus 14 >>> pci5: i/o space, memory space enabled >>> pdcsata0 at pci5 dev 2 function 0: Promise PDC20375 SATA150 controller >>> (rev. 0x02) >>> pdcsata0: interrupting at ioapic2 pin 2 >>> pdcsata0: bus-master DMA support present >>> atabus6 at pdcsata0 channel 0 >>> atabus7 at pdcsata0 channel 1 >>> atabus8 at pdcsata0 channel 2 >>> aapic1 at pci3 dev 4 function 1: vendor 0x1022 product 0x7451 (rev. 0x01) >>> acpicpu0 at cpu0: ACPI CPU >>> acpicpu0: C1: HLT, lat 0 us, pow 0 mW >>> acpicpu1 at cpu1: ACPI CPU >>> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 >>> satalink0: port 0: device present, speed: 1.5Gb/s >>> satalink0: port 1: device present, speed: 1.5Gb/s >>> satalink0: port 2: device present, speed: 1.5Gb/s >>> satalink0: port 3: device present, speed: 1.5Gb/s >>> wd0 at atabus0 drive 0 >>> wd0: <WDC WD360GD-00FNA0> >>> wd0: drive supports 16-sector PIO transfers, LBA48 addressing >>> wd0: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors >>> uhub0 at usb1: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>> uhub0: 3 ports with 3 removable, self powered >>> uhub1 at usb3: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>> uhub1: 2 ports with 2 removable, self powered >>> uhub2 at usb0: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>> uhub2: 3 ports with 3 removable, self powered >>> uhub3 at usb2: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>> uhub3: 3 ports with 3 removable, self powered >>> uhub4 at usb4: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >>> uhub4: 5 ports with 5 removable, self powered >>> wd0: 32-bit data port >>> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >>> wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >>> DMA) >>> wd1 at atabus1 drive 0 >>> wd1: <ST3120827AS> >>> wd1: drive supports 16-sector PIO transfers, LBA48 addressing >>> wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors >>> wd1: GPT GUID: ef1257a1-6735-11e3-b719-000fea5d15a1 >>> pdcsata0 port 1: device present, speed: 1.5Gb/s >>> pdcsata0 port 0: device present, speed: 1.5Gb/s >>> dk0 at wd1: ef1257d9-6735-11e3-b719-000fea5d15a1 >>> dk0: 234441581 blocks at 34, type: ffs >>> wd1: 32-bit data port >>> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >>> wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >>> DMA) >>> wd2 at atabus2 drive 0 >>> wd2: <WDC WD360ADFD-00NLR4> >>> wd2: drive supports 16-sector PIO transfers, LBA48 addressing >>> wd2: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors >>> wd2: 32-bit data port >>> wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >>> wd2(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >>> DMA) >>> wd3 at atabus3 drive 0 >>> wd3: <WDC WD360ADFD-00NLR5> >>> wd3: drive supports 16-sector PIO transfers, LBA48 addressing >>> wd3: 35304 MB, 71730 cyl, 16 head, 63 sec, 512 bytes/sect x 72303840 sectors >>> wd3: 32-bit data port >>> wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >>> wd3(satalink0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >>> DMA) >>> wd4 at atabus6 drive 0 >>> uhidev0 at uhub0 port 2 configuration 1 interface 0 >>> uhidev0: HP HP USB Laser Mouse, rev 2.00/31.00, addr 2, iclass 3/1 >>> ums0 at uhidev0: 3 buttons, W and Z dirs >>> wsmouse1 at ums0 mux 0 >>> pdcsata0:0:0: lost interrupt >>> type: ata tc_bcount: 512 tc_skip: 0 >>> wd4: <ST3120827AS> >>> wd4: drive supports 16-sector PIO transfers, LBA48 addressing >>> wd4: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors >>> wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >>> wd4(pdcsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >>> DMA) >>> wd5 at atabus7 drive 0 >>> pdcsata0:1:0: lost interrupt >>> type: ata tc_bcount: 512 tc_skip: 0 >>> wd5: <ST3120827AS> >>> wd5: drive supports 16-sector PIO transfers, LBA48 addressing >>> wd5: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors >>> wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) >>> wd5(pdcsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using >>> DMA) >>> Kernelized RAIDframe activated >>> pad0: outputs: 44100Hz, 16-bit, stereo >>> audio0 at pad0: half duplex, playback, capture >>> raid1: RAID Level 5 >>> raid1: Components: /dev/wd0a /dev/wd2a /dev/wd3a >>> raid1: Total Sectors: 144607360 (70609 MB) >>> raid1: GPT GUID: 5b5a0aae-1568-11e3-8834-000fea5d15a1 >>> dk1 at raid1: 5b5a0ae5-1568-11e3-8834-000fea5d15a1 >>> dk1: 144607293 blocks at 34, type: ffs >>> raid0: RAID Level 1 >>> raid0: Components: /dev/wd5a /dev/wd4a >>> raid0: Total Sectors: 234441472 (114473 MB) >>> boot device: raid0 >>> root on raid0a dumps on raid0b >>> root file system type: ffs >>> wsdisplay0: screen 1 added (80x25, vt100 emulation) >>> wsdisplay0: screen 2 added (80x25, vt100 emulation) >>> wsdisplay0: screen 3 added (80x25, vt100 emulation) >>> wsdisplay0: screen 4 added (80x25, vt100 emulation) >>> >>> ---- >>> Sometimes later (I can't yet find out exactly when, I might try again >>> bisecting) I get: >>> >>> .... >>> root file system type: ffs >>> fatal protection fauilt in supervisor mode >>> trap type 4 code 0 rip ffffffff80511a2a cs 8 rflags 10246 cr2 >>> ffff800036c88000 ilevel 0 rsp fffffe8006d08a20 >>> curlwp 0xfffffe8006d4da00 pid 1.1 lowest kstack 0xfffffe8006d052c0 >>> kernel: protection fault trap, code=0 >>> Stopped in pid 1.1 (init) at netbsd:check_exec+0x319: call >>> *8(%rax) >>> >>> db{1}> bt >>> check_exec() at netbsd:check_exec+0x319 >>> execve_loadvm() at netbsd:execve_loadvm+0x1ca >>> execve1() at netbsd:execve1+0x28 >>> start_init() at netbsd:start_init+0x26f >>> db{1}> >>> >>> -- >>> >>> (that is with a kernel from yesterday; same with the todays one). >>> ---- >>> >>> Chavdar Ivanov > > > > -- > ---- -- ----
