On Dec 8, 2005, at 1:35 AM, Robert Citek wrote:
> Next steps:
> 1) connect to the VPN from outside my firewall
>
I was able to connect using this sequence on the Mac:
$ public_server=cwelug.org
$ open_vpn_server=10.1.1.200
$ open_vpn_client=10.1.1.201
$ sudo echo ;sudo openvpn --dev tun --ifconfig ${open_vpn_client} $
{open_vpn_server} \
--remote ${public_server} \
--secret openvpn.key --verb 9 >&vpn.log &
Here's the test that shows that I can connect:
$ ping -R -c 4 10.1.1.200
PING 10.1.1.200 (10.1.1.200): 56 data bytes
64 bytes from 10.1.1.200: icmp_seq=0 ttl=64 time=54.460 ms
RR: 10.1.1.200
10.1.1.200
10.1.1.201
64 bytes from 10.1.1.200: icmp_seq=1 ttl=64 time=36.651 ms (same
route)
64 bytes from 10.1.1.200: icmp_seq=2 ttl=64 time=47.752 ms (same
route)
64 bytes from 10.1.1.200: icmp_seq=3 ttl=64 time=42.821 ms (same
route)
--- 10.1.1.200 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max/stddev = 36.651/45.421/54.460/6.535 ms
Up next:
> 2) configure the client and server to use an alternate port
> 3) figure out routing so that the client can get to the rest of the
> world using the OpenVPN server as the gateway
> 4) configure the client to do dhcp and NAT on the second NIC
>
Regards,
- Robert
http://www.cwelug.org/downloads
Help others get OpenSource software. Distribute FLOSS
for Windows, Linux, *BSD, and MacOS X with BitTorrent
_______________________________________________
CWE-LUG mailing list
[email protected]
http://www.cwelug.org/
http://www.cwelug.org/archives/
http://www.cwelug.org/mailinglist/
