Merci, mais j'avais d�j� trouv� cette info sur le site et justement apr�s avoir configurer le plotter, j'ai toujours ce message sur le plotter c'est pour cela que je partais en recherche de configuration du port com !
En tout cas merci d'avoir cherch�. @+ Paul -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Eric Bolly Envoy� : vendredi 19 d�cembre 2003 16:55 � : 'CyberTech' Objet : RE: [CCTK] Port com Site hp... Setting Up Serial Communication Parameters On The Front Panel Of The HP 7550A Plotter 1. To configure the 7550A set the serial settings through the Front Panel. The standard settings for PC communication is as follows: Remote = STANDALONE Handshake mode = HARDWIRE Parity = 8 BITS Baud rate = 9600 2. To access the SERIAL sub-menu, press the "ENTER" then the "NEXT DISPLAY" buttons. 3. Navigate through the different levels of the HP 7550A plotter Serial sub-menu using the "ENTER" and "NEXT DISPLAY" buttons. 4. Once the desired sub-menu is displayed, press the button corresponding to the menu choice you desire to change and display the current option. 5. Change the option by pressing the button under the option to reach the desired setting. Press the "ENTER" button to save and confirm the desired setting. NOTE: A serial cable must be connected to the computer/modem port of the HP 7550A to communicate with a PC and also verify that the PC and the software are set up to the same baud rate and parity that is set on the plotter. If necessary, contact the software company for software configuration information. Eric -- MSN Hotmail et MSN Messenger sur votre telephone mobile Inscrivez-vous sur http://www.fr.msn.be/mobile CyberCafe c'est chaque semaine le mardi 19h et 22h30 sur La 2! Desabonnement par email : <mailto:[EMAIL PROTECTED]>
