Hoping that this list is not utterly dead...
Are there any objections to or suggestions concerning me starting to
send in smokes of 32-bit and 64-bit builds of bleadperl on alternate
nights? (My system's not beefy enough to get through the lot every
night.) The reports are currently as below. One thing that concerns
me is that the Subject is the same in both cases. Should I tweak it?
How much?
------------------------------------------------------------------------
-------------
From: [EMAIL PROTECTED]
Subject: Smoke [5.9.4] 28148 PASS darwin 8.6.0 (macppc/1 cpu)
Date: 10 May 2006 17:19:00.000
To: domo
Automated smoke report for 5.9.4 patch 28148
Tullamore.local: PowerMac8,1 (1600 MHz) (macppc/1 cpu)
on darwin - 8.6.0
using cc version 4.0.1 (Apple Computer, Inc. build 5250)
smoketime 4 hours 58 minutes (average 1 hour 14 minutes)
Summary: PASS
O = OK F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during: - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep
28148 Configuration (common) -D'optimize=-O1 -g'
----------- ---------------------------------------------------------
O O O O -Duse64bitint
O O O O -Duse64bitint -Duseithreads
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio
Locally applied patches:
SMOKE28148
Compiler messages(gcc):
regcomp.c: In function 'S_study_chunk':
regcomp.c:1563: warning: comparison is always false due to limited
range of data type
sv.c: In function 'S_more_bodies':
sv.c:1067: warning: format '%d' expects type 'int', but argument 5
has type 'size_t'
sv.c:1067: warning: format '%d' expects type 'int', but argument 7
has type 'size_t'
sv.c:1067: warning: format '%d' expects type 'int', but argument 8
has type 'long unsigned int'
sv.c: In function 'Perl_sv_upgrade':
sv.c:1255: warning: comparison is always false due to limited range
of data type
sv.c:1309: warning: comparison is always false due to limited range
of data type
pp_sys.c:309: warning: 'S_emulate_eaccess' defined but not used
byterun.c: In function 'byterun':
byterun.c:894: warning: comparison is always false due to limited
range of data type
re_comp.c: In function 'S_study_chunk':
re_comp.c:1563: warning: comparison is always false due to limited
range of data type
sv.c: In function 'Perl_sv_dup':
sv.c:10026: warning: comparison is always false due to limited range
of data type
--
Report by Test::Smoke v1.19_76 build 914 running on perl 5.8.6
(Reporter v0.026 / Smoker v0.027)
------------------------------------------------------------------------
-------------
From: [EMAIL PROTECTED]
Subject: Smoke [5.9.4] 28126 PASS darwin 8.6.0 (macppc/1 cpu)
Date: 9 May 2006 02:31:00.000
To: [EMAIL PROTECTED]
Automated smoke report for 5.9.4 patch 28126
Tullamore.local: PowerMac8,1 (1600 MHz) (macppc/1 cpu)
on darwin - 8.6.0
using cc version 4.0.1 (Apple Computer, Inc. build 5250)
smoketime 5 hours 24 minutes (average 1 hour 21 minutes)
Summary: PASS
O = OK F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during: - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep
28126 Configuration (common) none <== I'll be adding "-
D'optimize=-O1 -g'"" -O3 takes too long
----------- ---------------------------------------------------------
O O O O
O O O O -Duseithreads
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio
Locally applied patches:
SMOKE28126
Compiler messages(gcc):
regcomp.c: In function 'S_study_chunk':
regcomp.c:1563: warning: comparison is always false due to limited
range of data type
sv.c: In function 'Perl_sv_upgrade':
sv.c:1255: warning: comparison is always false due to limited range
of data type
sv.c:1309: warning: comparison is always false due to limited range
of data type
pp_sys.c:309: warning: 'S_emulate_eaccess' defined but not used
byterun.c: In function 'byterun':
byterun.c:894: warning: comparison is always false due to limited
range of data type
re_comp.c: In function 'S_study_chunk':
re_comp.c:1563: warning: comparison is always false due to limited
range of data type
sv.c: In function 'S_more_bodies':
sv.c:1067: warning: format '%d' expects type 'int', but argument 5
has type 'size_t'
sv.c:1067: warning: format '%d' expects type 'int', but argument 7
has type 'size_t'
sv.c:1067: warning: format '%d' expects type 'int', but argument 8
has type 'long unsigned int'
sv.c: In function 'Perl_sv_dup':
sv.c:10026: warning: comparison is always false due to limited range
of data type
--
Report by Test::Smoke v1.19_76 build 914 running on perl 5.8.6
(Reporter v0.026 / Smoker v0.027)
--
Dominic Dunlop