(cc-ing list, i have no idea about printing for instance) i've never heard anything similar, my guess would be you're running with old modules in the path or something similarly odd.
maybe you could provide sample files for us to try and trigger it? cheers, jo On Thu, Nov 19, 2015 at 1:04 AM, Alan Lundin <aflu...@swcp.com> wrote: > I found something, but I'm not sure exactly what. I'm hoping > some of you guys closer to the code might have an idea. > > What I see is for D600 NEF files, if all I do is sharpen and/or > apply the Base Curve and/or Orientation, no problem. However, > if I do any kind of White Balance, Demosaic, Exposure, Crop, or > most of the other modules -- even if all I do is turn the module > off -- and then go to the print module, the image is cropped or > resized. Usually it crops, and when it does it takes perhaps 10% > from the top of the image. If it resizes, it reduces the image > to something like half (linearly) the size and pads out to the > expected size. > > Also, often when I go back to the darkroom, the darkroom image > goes completely black. I can recover from the black image by > turning on the Over/Under-Exposure mode, or sometimes by selecting > down the history stack and compressing. > > I have *NOT* had this happen with any JPEG (including D600 JPEGs) or > RAW files from other cameras -- both lower and one with higher > resolution. So far I've only had it happen for D600 NEF files. > But, it happens for every D600 NEF files I've tried. > > I also found that if the modules that cause the problem are in the > history stack, the Lighttable thumb image is also cropped/clipped > in the same way the Print module does. > > This happen with both RC1 and RC2. > > Sorry I don't have a better idea of what's going on. Does it ring > any bells with any of you? > > [ I compiled and run it under Fedora 23, Intel Core2 Duo E8400. ] > > --alan ___________________________________________________________________________ darktable developer mailing list to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
