Am Sonntag, 15. April 2018, 19:45:20 CEST schrieb Alexander Rabtchevich: > I use git master. That is the output: > > darktable-cmstest version 2.5.0+315~gbd094e2 > this executable was built with colord support enabled > darktable itself was built with colord support enabled > > couldn't locate primary CRTC! > CRTC for screen 0 CRTC 1 has no mode or no output, skipping > CRTC for screen 0 CRTC 2 has no mode or no output, skipping > CRTC for screen 0 CRTC 3 has no mode or no output, skipping > CRTC for screen 0 CRTC 4 has no mode or no output, skipping > CRTC for screen 0 CRTC 5 has no mode or no output, skipping > > DVI-D-0 the X atom and colord returned the same profile > X atom: _ICC_PROFILE (0 bytes) > description: (none) > colord: "(none)" > description: (file not found) > > Better check your system setup > - some monitors lacked a profile > You may experience inconsistent color rendition between color managed > applications > > > Geeqie determines correct profile without problems. GIMP seems not to > have problems too.
1. is your monitor connected to the DVI port? 2. Do you have more than one monitor or GPU? 3. Do you use X11 or Wayland? 4. Does DisplayCal load the profile at every system start? 5. When you say that darktable doesn't remember the manually specified profile, do you mean that you pick the profile in the dropdown list and when closing darktable and starting it again the dropdown is back to system profile? > With respect, > Alexander Rabtchevich Tobias PS: Please don't send a copy of your mails to me directly, I am subscribed to the list. [...]
Description: This is a digitally signed message part.