Tobias Ellinghaus wrote:
Am Sonntag, 15. April 2018, 19:45:20 CEST schrieb Alexander Rabtchevich:
I use git master. That is the output:
darktable-cmstest version 2.5.0+315~gbd094e2
this executable was built with colord support enabled
darktable itself was built with colord support enabled
couldn't locate primary CRTC!
CRTC for screen 0 CRTC 1 has no mode or no output, skipping
CRTC for screen 0 CRTC 2 has no mode or no output, skipping
CRTC for screen 0 CRTC 3 has no mode or no output, skipping
CRTC for screen 0 CRTC 4 has no mode or no output, skipping
CRTC for screen 0 CRTC 5 has no mode or no output, skipping
DVI-D-0 the X atom and colord returned the same profile
X atom: _ICC_PROFILE (0 bytes)
description: (none)
colord: "(none)"
description: (file not found)
Better check your system setup
- some monitors lacked a profile
You may experience inconsistent color rendition between color managed
applications
Geeqie determines correct profile without problems. GIMP seems not to
have problems too.
1. is your monitor connected to the DVI port?
Yes, DVI
2. Do you have more than one monitor or GPU?
I have onboard AMD GPU and AMD Radeon 580. Monitor is connected to the
latter one.
3. Do you use X11 or Wayland?
I guess my OS uses X11 version 1.18.4.
4. Does DisplayCal load the profile at every system start?
Yes, it does.
5. When you say that darktable doesn't remember the manually specified
profile, do you mean that you pick the profile in the dropdown list and when
closing darktable and starting it again the dropdown is back to system
profile?
Yes, I meant exactly that.
With respect,
Alexander Rabtchevich
___________________________________________________________________________
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
