hey,
too bad your system doesn't seem to allow to write backtraces, so i can
only guess.. are you using unity + progress bars therein or are these
darktable background process progress bars?
-jo
On Mon, Dec 9, 2013 at 12:01 PM, R S <papa.fil...@googlemail.com> wrote:
> Hi again,
>
> sorry for the boring discussion, I just want to use darktable , because it
> has so fantastic possibilities.
>
> So I have to stay with my RAF -to Tiff conversation and than go to
> Darktable.
> But there is the problem that darktable quits if there are Fuji RAFs in
> the imported folder and I click on one by chance.
> Would be nice if this could be solved , and darktable stays active .
> I get the following :
>
>
> box:~$ darktable
> [defaults] found a 64-bit system with 8134456 kb ram and 4 cores (0 atom
> based)
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Not a JPEG file: starts with 0x49 0x49
> Error: Failed to read Fujifilm IFD Makernote header.
> Not a JPEG file: starts with 0x49 0x49
> Error: Failed to read Fujifilm IFD Makernote header.
>
> (darktable:4015): Gtk-CRITICAL **: IA__gtk_progress_set_percentage:
> assertion 'percentage >= 0 && percentage <= 1.0' failed
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: Failed to read Fujifilm IFD Makernote header.
> Error: XMP Toolkit error 203: Duplicate property or field node
> Warning: Failed to decode XMP metadata.
> Error: Failed to read Fujifilm IFD Makernote header.
>
> (darktable:4015): Gtk-CRITICAL **: IA__gtk_progress_set_percentage:
> assertion 'percentage >= 0 && percentage <= 1.0' failed
> Error: Failed to read Fujifilm IFD Makernote header.
> Not a JPEG file: starts with 0x49 0x49
> Error: XMP Toolkit error 203: Duplicate property or field node
> Warning: Failed to decode XMP metadata.
>
> [rawspeed] No decoder found. Sorry.
> Could not attach to process. If your uid matches the uid of the target
> process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try
> again as the root user. For more details, see /etc/sysctl.d/10-ptrace.conf
> ptrace: Die Operation ist nicht erlaubt.
> /home/papa/4015: Datei oder Verzeichnis nicht gefunden.
> backtrace written to /tmp/darktable_bt_RG0T7W.txt
> Speicherzugriffsfehler (Speicherabzug geschrieben)
>
>
>
> darktable_bt_RG0T7W.txt
>
> this is darktable 1.2.3 reporting a segfault:
>
>
> /usr/share/darktable/gdb_commands:2: Error in sourced command file:
> No stack.
>
>
>
> Thank you for reading,
>
> regards
>
> papa
>
>
>
>
>
>
> Am 09.12.2013, 11:08 Uhr, schrieb johannes hanika <hana...@gmail.com>:
>
> On Mon, Dec 9, 2013 at 11:01 AM, R S <papa.fil...@googlemail.com> wrote:
>>
>> Hi,
>>>
>>> I read that Libraw is the fall back for darktable, and since
>>>
>>> >LibRaw 0.15.0 Release
>>>
>>> >Submitted by lexa on 23 May, 2013 - 16:36
>>>
>>> >LibRaw 0.15 Release available for download and use
>>>
>>> >New camera/format support
>>> >Adobe DNG: fast Load DNG (LightRoom 4.x), support for
>>> >lossy-compressed DNG (LR 4.x, requires libjpeg 6+)
>>> >Canon: G1 X, SX220 HS, EOS 5D Mark III, EOS 650D, EOS 1D-X,
>>> >100D (Rebel SL1), 700D (Rebel T5i), 6D, EOS M, G15, S110, SX50
>>> >Casio: X-S1, HS30EXR, X1-Pro, EX-ZR100,EX-Z8
>>>
>>> *>Fujifilm: X-E1, X20, X100S, SL1000, HS50EXR, F800EXR, XF1*
>>>
>>>
>>>
>>>
>>> there should be a support for Fuji non-Beyer architecture, so is there a
>>> chance to use Darkktable for the Fuji models?
>>>
>>>
>> no. this fuji discussion is really boring. reading the raw bits is a nice
>> first step, but the real satan sits in all the work that comes after that,
>> as mentioned a million times in various places. in this list:
>>
>> http://www.darktable.org/2012/12/released-1-1-1/comment-
>> page-1/#comment-8553
>>
>> you only get to the first item.
>>
>> j.
>>
>
>
> --
> Erstellt mit Operas revolutionärem E-Mail-Modul:
> http://www.opera.com/mail/
>
------------------------------------------------------------------------------
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
darktable-devel mailing list
darktable-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/darktable-devel
