I did upload the CR2 file from my camera, but it looks like google is
poking its nose. As suggested in other replies I'll try to upload at
other places.
Thank you,
Niranjan
On 4/7/19 10:13 AM, Anton Aylward wrote:
On 2019-04-07 11:45 a.m., Niranjan Rao wrote:
At this point, except from camera being on Av mode, I don't remember any other
settings such as exposure changed from default. I did turn on the flash as
camera prompted me to turn on the flash even if there was plenty of light in the
room.
I have uploaded one CR2 file at
https://drive.google.com/file/d/1CUTt7tEo0rmKwP99akAmJaV8dpJr6TBz/view?usp=sharing
I've made many mistakes of that order, the most dramatic was a day's outdoor
shooting with the camera set to incandescent light. AWB solves many sins!
but yes, darktable managed to correct that.
Grain? Well there are settings/tools for that.
Have you read the user manual? Try section 3.4.4
Have you googled for "darktable remove grain"
That turns up a couple of videos.
For example: https://www.roberthutton.net/archives/160
I do note that the file you uploaded has a slight problem. Some of the settings
/should/ be determinable by looking at the raw file's EXIF values. But when I
download and scan I get an error.
Perhaps you could check and post the EXIF values from the original.
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to [email protected]
