Am Wed, 11 Dec 2019 21:36:41 -0800 schrieb jys <[email protected]>:
> On Fri, Dec 6, 2019, at 16:23, Аl Воgnеr wrote: > > > My lens-configuration is based on this post: > > https://github.com/lensfun/lensfun/issues/895 > > I cleaned up the profile from that upload, see attachment. If you can > test it and report, I'll add it to the database. Thanks, for a 1st test it looks good and it seems to work. But, I do not own this camera and there was a strange behavior with darktable. After I configured the photo manually, dt seems to remember this, even if the xmp-file was deleted. Only a newer used photo showed the manual lens configuration. Since I do not have a test photo, which was never used, I cannot say it works for sure, but I removed the xmp-file and cleaned the database. It is different to my experiences. I will give you feedback again, when I get a new test photo, can take a while, because the owner is ill at the moment. > (There are some specific little things with fixed-lens profiles that > are needed to work right in darktable; the one that's not obvious > from observation of examples is that the mount name should start with > lowercase.) Good to know. Are you sure to use <cropfactor>1.5</cropfactor> After searching the net, I found <cropfactor>1.53</cropfactor> And I have no idea, if this makes a difference. https://www.digicamdb.com/specs/ricoh_gr-iii/ Sensor diagonal = 28.21 mm Crop factor = 43.27 / 28.21 = 1.53 Al ____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to [email protected]
