Hi, I have an issue but I'm not sure if it's darktable or lensfun fault.
My problem is that when I load an ARW file taken with a Sony RX-100 in the darkroom, the lens is not identified, and therefore no distortion correction is applied. What is strange is that there is no visible distortion in the lighttable. If I look at the "image information" pane on the left of the darkroom, I can see that the model and maker are correctly identified, while the lens is not : model DSC-RX100 maker SONY lens If I go to the "lens correction" module it says : "camera/lens not found - please select manually". The "Camera" field displays "DSC-RX100". I can select only Sony->DSC-RX100 and then it displays "Sony,DSC-RX100". The "Lens" field displays nothing. I can select "Generic->... 3 lens" or Sony->RX100 ; selecting the later it displays "Sony, RX100" and the distortion is then corrected as expected. Now how do I automate this ? Why is darktable not picking the only sensitive option for the lens ? Because you know, I don't want to manually set the lens for each raw file I have... Thanks ! -- Rodolphe Rocca ------------------------------------------------------------------------------ WatchGuard Dimension instantly turns raw network data into actionable security intelligence. It gives you real-time visual feedback on key security issues and trends. Skip the complicated setup - simply import a virtual appliance and go from zero to informed in seconds. http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk _______________________________________________ Darktable-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/darktable-users
