Le 21/05/2014 13:30, Roman Lebedev a écrit :
>Back to the initial question, worded even shorter: "Is it possible to
>manually select a few pictures in the light table mode and batch enable
>lens correction ? How ?"
If you are using DT v1.5 (git master only) then you can:
if the values that are set in lens iop after you press reset (or just
switch it on without touching any controls) are fine for you - then
just create auto-appliable preset and everything will work exactly as
you would expect it to work
otherwise - [for now] you can not.
Thank you for both replies. It's good that it is possible.
>A similar thing was discussed regarding "auto" setting in exposure
>module: copy-paste applies the specific values that were computed by
>auto-exposure on the source photo, while in some (not all) cases the
>user means "I want to apply auto-exposure to all destination photos, not
>apply the particular EV adjust amount that was computed for the source
>picture".
This will be "fixed" when
https://github.com/darktable-org/darktable/pull/536 will be merged.
I've fetched your branch and might try that soon.
It will be even better when there generally is a clear (visually
discoverable by someone that comes unaware) indication on how to mean "I
want to re-apply auto" or "I want to appy these particular serttings".
Thanks again.
--
Stéphane Gourichon
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Darktable-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/darktable-users
