Thanks Carlos,
I see but I want to be sure. Because if fail, it will take me long time to repair. At this time, I have no way flashing uboot except using existent uboot, I don't have JTAG emulator. Could you please show me what JTAG I should have for working with Davinci.
Carlos Ojea <[EMAIL PROTECTED]> wrote:
> I think I can use file: "u-boot-594-nor.bin" to flash my board. Am I right?
It depends on your board. I could see some 'sync problems' on my LCD
attached to DC5 if I use u-boot-594-nor.bin, so I should use
u-boot-567-nor.bin (however, u-boot-594-nand.bin works ok for me)
Maybe u-boot-594-nor.bin works well for you if your board has been made lately.
> Is there any modifications I should do or I can built and flash uboot
> with original source code from TI's page?
I made u-boot-594-nand.bin from the original source (just change the
define to use nand) and it works ok.
Regards,
Carlos
Send instant messages to your online friends http://uk.messenger.yahoo.com
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
