Ah Ha!
That works! I
was able to finally find it (per Jason's advice) format it and now I can
load files onto it
My plan is to use it as a
"read only" device by which I can put image snapshots on it (from the
davinci side) and make them accessible to the host.
If I assume that the host will never Write to the disk, can I skirt
around the "never use the loop driver" issue so I can have simultaneous
access?
Or will I have to manually stop the drive (through davinci), load my new file, and then restart the gadget so the host sees it?
Thanks!
-----Original Message-----
From: "Kridner, Jason" <[EMAIL PROTECTED]>
To: "Steve Spano" <[EMAIL PROTECTED]>, "Diego Dompe" <[EMAIL PROTECTED]>, <[email protected]>
Date: Wed, 8 Nov 2006 08:41:09 -0600
Subject: RE: ### USB Mass Storage
You likely need to format the drive, in addition to creating the partition, before a letter is assigned. Take a look under Administrative Tools -> Computer Management -> Storage -> Disk Management and see if it is there. You can format the drive using that tool as well.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Spano
Sent: Wednesday, November 08, 2006 8:38 AM
To: Diego Dompe; [email protected]
Subject: Re: ### USB Mass StorageHi,
