Sanity check... did you rebuild the Codec Server (DSP image)?
Also, double check your steps with this:
http://www.mail-archive.com/[EMAIL PROTECTED]
om/msg00876.html
Chris
________________________________
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
com] On Behalf Of George Gu
Sent: Monday, November 27, 2006 8:48 PM
To: [email protected]
Subject: FW: Use small size memory issue!
All,
I have met a problem when run DVEVM 1.10 demo---"encodedecode".
When I run this demo in 256MB memory, everything is OK, but when I
shrink the memory into 64MB I met a problem with codec server. I am sure
I have use a correct memory map, and recompile CMEM, DSPLINK with a
right memory config. Following is my debug message: ( I use 28MB for
Linux).
************************************************************************
************************************************************************
**************
[EMAIL PROTECTED]:~/dvevm_1_10_28M# sh ./loadmodules.sh
cmemk: module license '(c) Texas Instruments' taints kernel.
cmem initialized 4 pools between 0x81c00000 and 0x82400000
dsplinkk: no version for "struct_module" found: kernel tainted.
DDR_START 0x83600000 DDR_SIZE 0x800000
[EMAIL PROTECTED]:~/dvevm_1_10_28M# ./encodedecoded
Encodedecode Debug: NTSC selected
Encodedecode demo started.
Encodedecode Debug: Codec Engine initialized
Encodedecode Debug: Logging initialized
Encodedecode Debug: Rendezvous opened for 3 threads
Encodedecode Debug: Display buffer 0 mapped to address
0x42b42000
Encodedecode Debug: Display buffer 1 mapped to address
0x42beac00
Encodedecode Debug: Display buffer 2 mapped to address
0x42c93800
Encodedecode Debug: Video display device initialized.
Encodedecode Debug: Set the capture input to id 0
Encodedecode Debug: OSD successfully initialized
Encodedecode Debug: OSD transparency initialized
Encodedecode Debug: Codec Engine opened in control thread
Encodedecode Debug: NTSC camera detected
Capturing 720x480 video (cropped to 720x480)
Encodedecode Debug: 3 capture buffers were successfully
allocated.
Encodedecode Debug: Capture buffer 0 mapped to address
0x42e90000
Encodedecode Debug: Capture buffer 1 mapped to address
0x42f68000
Encodedecode Debug: Capture buffer 2 mapped to address
0x43040000
Encodedecode Debug: Video capture initialized and started
Encodedecode Debug: Codec Engine opened in video thread
Encodedecode Error: Can't open decode algorithm: h264
Encodedecode Debug: Entering display main loop.
Encodedecode Debug: MSP430 library initialized
Encodedecode Debug: User interface created
Encodedecode Debug: Entering control main loop.
************************************************************************
************************************************************************
*******************
George Gu
(Xiangyu Gu)
Wintech Digital System Co.
Beijing, China
Ph: 8610-8278-2828 ext.168
Fax: 8610-8278-0028
http://www.wintechdigtal.com <http://www.wintechdigtal.com>
----------------------------
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
