Hi, Yes, you are right about that "SPRAA52". By following all the information as mentioned in "SPRAA52", I suppose you can connect this DaVinci DVEVM with Mt9t001 CIS. And I already did it successfully!
And regarding those Linux drivers (I2C, CCDC...), I have contacted technical service guys in ti and they replied that, "they are working for a demo device driver and will release it 1Q07. They remove a lot information in the VPSS data sheet if you have old version and compared it with current version. I also have a prototype drivers for my project so far but the performance still need improvement. And I am working on this ? 2007/2/16, Chezhya\ P <[EMAIL PROTECTED]>:
Thanks for yor feedback. I would like to know the following Have you interfaced this CCD sensor to DM642 or DaVinci because the application note "SPRAA52" is for interfacing with DM642. Do we have the patch for MT9T001P12 with respect to 1. I2C driver 2. Video capture driver Regards P.Chezhyan -----Original Message----- *From:* [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] Behalf Of *Johnson Lee *Sent:* Thursday, February 08, 2007 3:37 PM *To:* [email protected] *Subject:* Interfacing CCD sensor (MT9T001P12) to DaVinci Hello, I use the same CIS chip as you described. You can check ti's document: "SPRAA52 " for more detailed information include schematic. If you have more questions, please let me know. Also you have to pay attention to DC4 pin 2. That's all. -- BR, Johnson Lee
-- BR, Johnson Lee ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
