Hi, Thanks for your reply Rudy, I have looked through all the related posts and have not been able to get any of the suggestions I found to work on my board. We will actually be using a frame grabber so we will be able to configure it for various input types but we will be sending 800x600 24bit RGB. Could you send me your configuration for the parallel 800x600 display? Thanks, Euan
-----Original Message----- From: Rudy Reinsch [mailto:[EMAIL PROTECTED] Sent: 20 November 2007 15:33 To: Cochrane, Euan; Davinci-Linux-Open-Source (E-mail) Subject: RE: digital video output DC5 DVEVM Hello You don't need an LCD connected to get signals out of DC5 if it is Configured correctly. Check previous posts to get more info. You will Have to decide on the LCD type (resolution, interface) and also obtain A suitable cable or adapter. We have connected both 800x600 parallel And 1024x768 ldvs displays. Cheers Rudy. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > ] On Behalf Of Cochrane, Euan > Sent: 20 November 2007 14:36 > To: Davinci-Linux-Open-Source (E-mail) > Subject: RE: digital video output DC5 DVEVM > > Time for a stupid question... do you need to have an LCD > display attached to DC5 before it will output? i.e. is there > some sort of hand shake that happens before data is > transmitted? so far I have just been probing the various pins > of DC5 with a scope and not seeing any change in the pin > voltages (some of the pins are non-zero). > Thanks, > Euan > > -----Original Message----- > From: Cochrane, Euan [mailto:[EMAIL PROTECTED] > Sent: 20 November 2007 12:26 > To: Davinci-Linux-Open-Source (E-mail) > Subject: digital video output DC5 DVEVM > > > Hi, > I am really struggling to get any kind of output on the > digital video out (DC5) of the DVEVM. I have tried > configuring the registers myself, I tried installing the HD > video drivers supplied with spraan0 and I tried using the > register config from those drivers with the old drivers but I > am still not able to get a digital output. Could someone who > has used the DC5 output please post the configuration that they used? > Thanks > Euan > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > ______________________________________________________________ > __________ > This e-mail has been scanned for all viruses by Star. The > service is powered by MessageLabs. For more information on a > proactive anti-virus service working around the clock, around > the globe, visit: > http://www.star.net.uk > ______________________________________________________________ > __________ > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
