Most of the DaVinci I/O are 1.8V, the LCD interface is no exception (?). You need to chose a display that can operate with these levels or add level shifters.
regards, matthias Cochrane, Euan wrote: > Well, surprise surprise it didn't work! everything looks fine on the scope > but it seems that the signal level is too low to be picked up properly by our > frame grabber. Hopefully this will be the last time I need to ask for help. > Is there any way to increase the output level of the signals on DC5? > currently they have an amplitude of only ~1.7v. I looked through the > registers for the VPBE and the closest I could find to what I'm looking for > was YCOLVL (Yout and Cout Level), originally it was set to 0x00 so I tried > setting it to 0xFF (it's maximum value for both Yout and Cout) but there was > no change in the output. does anyone know if/how I can increase the output > level of DC5? I am outputting 24bit RGB along with the pixel clock, hsync, > vsync and lcd_oe all of which have an output level of ~1.7v. > Thanks, > Euan > _______________________________________________ > Davinci-linux-open-source mailing list > Davinci-linux-open-source@linux.davincidsp.com > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > -- * Matthias Welwarsky Project Manager Software Germany * ____________________________________________________________________________ This email and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to which they are addressed. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited. E-mail messages are not necessarily secure. Archos does not accept responsibility for any changes made to this message after it was sent.
_______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source