firstly, you have to make sure that you have enabled correct nfs settings in your linux distrubution. and also you have to set the correct ip addresses for the board to see the host machine and to use nfs from your pc. these commands at bootloader level may not be enough, it would be better if you forward all of you environment settings not just the commands you enter.
On Dec 18, 2007 3:18 PM, canibek sagin <[EMAIL PROTECTED]> wrote: > Hi every one; > I have a Dm 355 evaluation board, I tried to connect it with my host > computer which has a Red hat Linux on Virtual machine (VM ware > workstation),I am using RS-232 (Hyperterminal) and Ethernet connection but I > couldn't achieve to get host machine's IP. > I wrote these codes > > EVM # setenv nfshost <IP ADRESS> > EVM # saveevm > EVM# boot > > and Hyperterminal says me "kernel panic" :) why kernel paniced? > > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > -- Utku Bulkan Airties Wireless Networks Informatics Institute, Technical University of Istanbul http://www.students.itu.edu.tr/~bulkanu/ [EMAIL PROTECTED] +905373180671 _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
