What bootargs you are using? can you send it to me along with kernel bootlog.
Thanks, Vinod ----- Original Message ----- From: canibek sagin To: [email protected] Sent: Tuesday, December 18, 2007 6:48 PM Subject: I couldnt connect to board!!! Hi every one; I have a Dm 355 evaluation board, I tried to connect it with my host computer which has a Red hat Linux on Virtual machine (VM ware workstation),I am using RS-232 (Hyperterminal) and Ethernet connection but I couldn't achieve to get host machine's IP. I wrote these codes EVM # setenv nfshost <IP ADRESS> EVM # saveevm EVM# boot and Hyperterminal says me "kernel panic" :) why kernel paniced? - This message has been scanned for viruses, spam and dangerous content and is believed to be clean. ------------------------------------------------------------------------------ _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source -- eInfochips Business Disclaimer: This message may contain confidential, proprietary or legally Privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, Disclose,distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated.Nothing contained in this message shall be construed as an offer or acceptance of any offer by eInfochips Limited and/or eInfochips Inc(“eInfochips”) unless sent with that express intent and with due authority of eInfochips.EInfochips has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
