Amresh, The error seem to indicate the IDE cable seems to be faulty or you are operating DaVinci ATA controller in modes that it cannot support. Both these reasons will typically lead to the CRC error situation. regards swami
________________________________ From: [EMAIL PROTECTED] on behalf of Amaresh Ram Sent: Wed 12/19/2007 9:53 AM To: [email protected] Subject: Problem in HDD Disk Access Hi, We are trying to access the HDD Disk (40GB) connected to the DM6446 platform through IDE interface. We are following procedure: Step 1. Boot the platform using NFS boot method Step 2. Create partition using fdisk /dev/hda command from minicom On performing step 2, following message appears on the terminal hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown ide0: reset: success hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 0 Can someone help me to resolve the issue? Regards, Amaresh ______________________________________________________________________ _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
