Antonio,
As Dirk points out there is an application called DVFlasher that may
be used to perform this task over the serial port, however the version
used by the Davinci board will not work on the DM355 due some
differences on the magic signature used for the UBL.
There is another option if you already have a standard ARM JTAG (if
no, you can get a cheap Olimex OpenOCD based by less than $100 if I
recall correctly). you can use the "setup" program of the bootloader
provided by the RidgeRun free SDK for DM355. This is a small firmware
you can load on IRAM to perform the low level init, and after that you
can load u-boot image and burn it to flash (I have done that several
times). If you are interested on this idea I can provide you more
information.
Diego Dompe
RidgeRun Engineering
On Mar 22, 2008, at 4:52 AM, António Silva wrote:
Hello,
I am starting working with dm355 EVM, and one question arises: Is
there's any other way to load uBoot without Code Composer Studio??
Is there any open-source aplication do perform this?
It seems a waste having to buy CCS only to load the flash with uBoot.
Best Regards,
A.Silva
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
