Hi, We have 2 DM355 Boards and both show a problem where the ethernet sometimes fails to come up when the board boots. Do other people see this? If you boot a Linux kernel from FLASH with NFS root filesystem it gets as far as the DHCP request for its IP address (kernel autoconfig) and never gets an address. Booting with a FLASH kernel and FLASH filesystem with no kernel autoconfig but 'dhcpcd' enabled, again the DHCP request is never answered. Also, just booting into u-boot can fail to transfer files (static addresses of DM355 & TFTP server). In all cases rebooting, pressing the reset button or power cycling the board usually fixes it. Regards Phil Q Phil Quiney, Senior Software Engineer Trinity Convergence Cambridge Business Park Cowley Road Cambridge CB4 0WZ, UK T: +44(0)1223-435536 F: +44(0)1223-435560 www.trinityconvergence.com <http://www.trinityconvergence.com/>
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
