Hi Steve,
> The following program may help you. It is a prlgram which will flash
> the DM355 Flash through the RS232 port.
>
> http://wiki.davincidsp.com/index.php?title=Serial_Boot_and_Flash_Loading
>_Utility
Downloaded, thanks.
<joking mode>
Just for curiosity: but why ALL single files are gzipped?? doesn't suffice
a single step of tar -xz ?
anyway.. luckily "find -exec gunzip {} \;" isn't too much difficult ;)
</joking mode>
I run it and it hangs on sending CRC table to evmdm355...
better: the _board_ hangs, i see the "boot led" blinking...that happen with
trouble in booting sequence, if i'm not wrong...
This is my command line:
mono ./slh_DM35x.exe -p /dev/ttyUSB0 -load2IRAM UBL/ubl_DM35x_nand.bin
and this is his output:
-----------------------------------------------------
TI Serial Loader Host Program for DM35x
(C) 2008, Texas Instruments, Inc.
Ver. 1.00
-----------------------------------------------------
Loading image to ARM IRAM
Attempting to connect to device /dev/ttyUSB0...
Press any key to end this program at any time.
Waiting for the DM35x...
BOOTME commmand received. Returning ACK and header...
ACK command sent. Waiting for BEGIN command...
Target: BEGIN
BEGIN commmand received. Sending CRC table...
My version of mono is:
$ apt-cache policy mono-common
mono-common:
Installato: 1.9.1+dfsg-1ubuntu1~dhx2
I'm in Ubuntu 8.04, with mono taken directly from mono homepage.
(apt line: "deb http://directhex.mfgames.com/ hardy main" )
Do you have idea of what could be the problem?
What should I do to exploit it?
Thanks, regards!
--
Andrea Gasparini
---- ImaVis S.r.l. ----
web: www.imavis.com
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
